Value Brand
Value Brand 13E395 Digital Panel Mount NTC -58 to 158 1 1/4 in
Digital panel-mount thermometer reading -58 to 158 °F with ±1.8 °F accuracy and 5 ft sensor cable
- TypeEnvironmental & Mechanical
- Wide temperature range from -58 to 158 Fahrenheit
- Clear 0.4 inch digit height on 4-digit LCD
- Accurate within 1.8 degrees Fahrenheit from -4 to 86 degrees
- Five foot cable allows flexible panel placement
- Powered by single AAA battery for simple operation
Digital panel thermometer
The ZORO SELECT 13E395 mounts in a panel cut-out and displays temperature on a 0.4 in high four-digit LCD. It covers -58 to 158 degrees Fahrenheit with a 1 1/4 in diameter NTC sensor on a 5 ft cable. Power comes from a single AAA cell and the unit carries a Proposition 65 warning for listed chemicals.
Accuracy across the range
Between -4 and 86 degrees Fahrenheit the readout stays within 1.8 degrees Fahrenheit of true temperature. Outside that band the tolerance widens to 3.6 degrees Fahrenheit. No backlight is fitted, so the display relies on ambient light for visibility in dim conditions.
Panel-mount build and daily use
The 1.34 in wide by 0.4 in high housing slips into a dashboard or enclosure and is held by the integral mounting collar. The 5 ft lead gives routing flexibility but fixes the sensor position relative to the display. Users needing a backlit readout or a different probe length will need another model.
Highlights
- Wide temperature range from -58 to 158 Fahrenheit
- Clear 0.4 inch digit height on 4-digit LCD
- Accurate within 1.8 degrees Fahrenheit from -4 to 86 degrees
- Five foot cable allows flexible panel placement
- Powered by single AAA battery for simple operation
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Environmental & Mechanical |
Questions about this item
How much power does the panel meter draw when it runs continuously?
It operates from a single AAA cell, so current draw is very low and the battery lasts for extended continuous use.
What must I already have to install and power the meter?
You need a panel cut-out that fits the 1.34 in wide by .4 in high display and one AAA battery for power.
Will the 5 ft sensor cable reach equipment mounted in an older panel?
The included 5 ft cable gives enough length to route the NTC probe to most legacy panel locations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Lab Safety Supply Inc 667123 24 Well Tissue Culture Plate w/Lid PK50
- Assortments & Kits
Lab Safety Supply Inc 11L806 2mL Pipet Individually Wrapped PK600
- Assortments & Kits



