We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular rubber dock bumper with four mounting holes

Value Brand

Value Brand 13 x 4 x 12 in Rubber Dock Bumper

SKU CH-DHTD-YFEN5

Rectangular rubber dock bumper measuring 13 by 12 by 4 inches with four bolt-on mounting holes

  • 13 in width protects dock edges from impact
  • 12 in height covers vertical contact zone
  • 4 in depth absorbs collision energy
  • Four bolt holes enable secure mounting
  • Rubber construction resists marine weathering

Dock Bumper Dimensions

This rubber dock bumper measures 13 inches wide by 12 inches high by 4 inches deep. The rectangular profile provides a broad contact surface for protecting pilings or seawalls. Four mounting holes are spaced 9 1/4 inches apart horizontally and 7 inches vertically. A 1 1/2 inch access hole is included in the design.

Suitable Marine Applications

The bumper suits dock owners needing a bolt-on rubber fender for standard piling protection. The 13/16 inch mounting holes accept common lag bolts or carriage bolts. Buyers requiring a different profile, such as cylindrical or corner guards, should look at other styles. Those needing a non-bolt mounting method will not be able to use this unit.

Installation Requirements

Installation requires a flat vertical surface with clearance for the 13 by 12 inch face and 4 inch projection. Four fasteners matching the 13/16 inch hole diameter must be supplied by the installer. The unit ships as a single rubber moulding with no included hardware. The California Proposition 65 notice applies to this product.

Highlights

  • 13 in width protects dock edges from impact
  • 12 in height covers vertical contact zone
  • 4 in depth absorbs collision energy
  • Four bolt holes enable secure mounting
  • Rubber construction resists marine weathering

Specifications

BrandZORO SELECT

Questions about this item

What mounting hardware do I need for the 13/16 in holes on this bumper?

You will need bolts with a 13/16 in shank diameter plus matching washers and nuts to secure the four mounting holes.

Will the 9 1/4 in by 7 in hole spacing match my existing dock brackets?

The bumper mounts on a 9 1/4 in wide by 7 in high centre pattern; compare those centres with your current brackets before drilling.

How do I confirm the bumper is seated correctly after bolting it on?

Check that the rectangular face sits flush against the dock, the 1 1/2 in access hole lines up with your hardware, and all four bolts are tight.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.