Value Brand
Value Brand 12V 20Ah Sealed Lead Acid Light Kit
A 12 V 20 Ah sealed lead-acid battery with bolt terminals for general-purpose power backup
- 12 V 20 Ah capacity powers devices for extended periods
- AGM sealed design prevents leaks and needs no maintenance
- Bolt-hole terminals allow secure, tool-free cable connections
- Compact 7.13 × 6.54 × 2.99 in case fits tight enclosures
- Rechargeable up to three years for long service life
Sealed 12V 20Ah AGM Battery Kit
This sealed lead-acid kit uses AGM construction at 12 volts and 20 amp-hours. It is built for general-purpose power in indoor and outdoor settings. The bolt-hole tabs mount on top for quick wiring.
General-purpose backup and portable power
It suits buyers who need a rechargeable 12V source for alarms, lighting or small DC loads. It is not for users who need higher capacity than 20Ah or faster recharge than 16 hours. It is also not for applications above 140 degrees F.
20Ah capacity at 12 volts
The 20Ah rating at 12V DC is the single figure that decides fit. It sets the energy available per charge and matches the CP12-20 cross-reference. Verify this capacity against your load before purchase.
Highlights
- 12 V 20 Ah capacity powers devices for extended periods
- AGM sealed design prevents leaks and needs no maintenance
- Bolt-hole terminals allow secure, tool-free cable connections
- Compact 7.13 × 6.54 × 2.99 in case fits tight enclosures
- Rechargeable up to three years for long service life
Specifications
| Brand | ZORO SELECT |
|---|
Questions about this item
Do I need a charger that can deliver a 16-hour recharge cycle for this 20 Ah AGM battery?
Yes, the manufacturer specifies a 16-hour recharge time for the 20 Ah capacity, so the charger must support that duration.
Will the tab-with-bolt-hole terminals on this 12 V battery connect to the ring terminals on my existing wiring harness?
The terminals are tabs with bolt holes designed for ring-lug connections, matching common harness hardware.
How can I confirm the battery is holding charge after installation?
After a full 16-hour charge, measure the resting voltage with a multimeter; a healthy 12 V AGM unit should read near its nominal voltage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



