We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass swing check valve with NPT threaded ends

Value Brand

Value Brand 10F327 2" NPT Brass Swing Check Valve

SKU CH-XBDE-4VPR9

Brass swing check valve with 2-inch NPT connections handles water up to 180 °F and 200 psi

  • Size2"
  • TypeOther
  • Prevents backflow with inline swing mechanism
  • Brass body resists corrosion for long service
  • Operates from -20 °F to 180 °F
  • Handles up to 200 psi water pressure
  • Low 0.750–1.000 psi cracking pressure opens easily

2-inch Brass Swing Check Valve

This 2-inch NPT brass swing check valve prevents reverse flow in plumbing systems. The inline swing mechanism opens with forward pressure and closes automatically when flow stops. It suits residential and light commercial water lines.

Replaces worn or missing check valves

Swap out a failed valve that lets water hammer or backflow occur. The 0.750 to 1.000 psi cracking pressure means the disc opens with minimal head pressure. The jump is worth it when an old valve no longer seals or chatters in the line.

Handles sustained pressure and temperature cycles

Rated for 200 psi maximum water pressure and temperatures from -20 to 180 degrees F. Brass body and seal resist corrosion during continuous service. Horizontal or vertical mounting keeps the disc operating reliably over long runs.

Highlights

  • Prevents backflow with inline swing mechanism
  • Brass body resists corrosion for long service
  • Operates from -20 °F to 180 °F
  • Handles up to 200 psi water pressure
  • Low 0.750–1.000 psi cracking pressure opens easily

Specifications

BrandZORO SELECT
Size2"
TypeOther

Questions about this item

Will the 2" FNPT x FNPT threads on this brass swing check valve mate directly with my existing 2" NPT piping?

Yes, the valve uses FNPT x FNPT connections sized for 2" NPT pipe threads, so it threads straight onto matching male NPT fittings without adapters.

The spec says horizontal or vertical mounting — which orientation is correct for my horizontal supply line?

Horizontal mounting is approved; just install the valve with the hinge pin level so the brass disc swings freely and gravity does not hold it partially open.

How often should I inspect or replace the brass disc and seat given the 0.750 to 1.000 psi cracking pressure and 200 psi rating?

Plan a visual check annually; if the disc no longer seals at the low cracking pressure or shows pitting from the 180 °F max temperature cycles, replace the valve.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.