We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze swing check valve, inline body, NPT threads, white steel handle, 1 1/2 inch

Value Brand

Value Brand 10F305 1-1/2" NPT Bronze Swing Check Valve

SKU CH-V4HC-CQW3S

Bronze swing check valve with PTFE seal handles 76 GPM water flow at 300 psi and 150 psi steam pressure

  • Size1 1/2"
  • TypeOther
  • Bronze body resists corrosion for long service life
  • PTFE seal handles 406 Degrees F maximum temperature
  • 76 gpm full flow capacity with low 0.750 to 1.000 psi cracking pressure
  • Installs horizontally or vertically with 1-1/2" FNPT connections
  • Rated 300 psi water and 150 psi steam pressure

Bronze Swing Check Valve 1-1/2" NPT

This bronze swing check valve uses a 1-1/2" FNPT connection for inline installation. It handles water pressure up to 300 psi and steam pressure up to 150 psi WSP. The valve operates between -20 and 406 degrees F with a cracking pressure of 0.750 to 1.000 psi.

Installation Requirements

Verify that your piping uses 1-1/2" FNPT threads to match the valve connections. Confirm the system pressure stays within the 300 psi water and 150 psi steam limits. Ensure the mounting orientation works for horizontal or vertical flow with the inline swing design.

Suitability

This valve suits plumbing and steam systems needing bronze construction and PTFE seals for full flow at 76 gpm. It is not for buyers who require a different pipe size or connection type. It is not for systems exceeding the listed pressure or temperature ratings.

Highlights

  • Bronze body resists corrosion for long service life
  • PTFE seal handles 406 Degrees F maximum temperature
  • 76 gpm full flow capacity with low 0.750 to 1.000 psi cracking pressure
  • Installs horizontally or vertically with 1-1/2" FNPT connections
  • Rated 300 psi water and 150 psi steam pressure

Specifications

BrandZORO SELECT
Size1 1/2"
TypeOther

Questions about this item

What does the 10F305 valve come with and what must I buy separately?

The valve ships as a complete bronze swing check unit with PTFE seals and FNPT threaded ends; pipe, thread sealant and any mounting brackets are not included.

How do I choose between the listed pressure ratings for this valve?

Use the 300 psi rating for cold water systems and the 150 psi WSP rating for steam lines; do not exceed either limit for the intended fluid.

What does the 76 gpm flow figure mean once the valve is installed?

It indicates the valve can pass up to 76 gallons per minute of water in the fully open position with minimal restriction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.