We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black forged steel bushing, one inch by three quarter inch NPT threads

Value Brand

Value Brand 1" x 3/4" Black Forged Steel Bushing

SKU CH-5AGG-R7TEH

Connects 1-inch to 3/4-inch NPT pipe threads with Class 3000 forged steel rated to 3000 psi at 72 degrees F

  • Withstands 3000 psi at 72 Degrees F for high-pressure systems
  • Meets ANSI B 1.20.1, ASME B 16.11 and SA105, ASTM A105 standards
  • Black forged steel construction resists corrosion in demanding environments
  • NPT threaded connection ensures a secure, leak-resistant seal
  • Reduces 1 in pipe to 3/4 in for versatile plumbing fit

1" x 3/4" Black Forged Steel Bushing

This NPT-threaded bushing reduces a 1-inch pipe connection to 3/4-inch using Class 3000 forged steel. It suits plumbers and maintenance teams joining dissimilar pipe sizes in water, oil, or gas lines where a compact, high-pressure reducer is required. The ANSI B1.20.1 taper threads seal without welding or flanges. Buyers needing a straight coupling or a larger reduction ratio should select a different fitting type.

3000 psi pressure class at 72°F

Rated to 3000 psi at 72 degrees Fahrenheit, the fitting handles typical industrial hydraulic and steam circuits within that temperature window. Pressure capacity drops as temperature rises, so systems operating above ambient need engineering verification. It is not intended for cryogenic service or pressures exceeding the Class 3000 limit. Designers requiring higher pressure ratings must specify a heavier class.

ANSI B1.20.1, ASME B16.11 and SA105 compliance

The bushing meets ANSI B1.20.1 for thread form, ASME B16.11 for forged fitting dimensions, and ASTM A105 SA105 for carbon-steel material quality. These standards give inspectors a clear acceptance baseline and simplify code documentation. No gaskets, sealant, or installation tools are supplied in the package. Installers must provide thread sealant and wrenches sized for the hex flats.

Highlights

  • Withstands 3000 psi at 72 Degrees F for high-pressure systems
  • Meets ANSI B 1.20.1, ASME B 16.11 and SA105, ASTM A105 standards
  • Black forged steel construction resists corrosion in demanding environments
  • NPT threaded connection ensures a secure, leak-resistant seal
  • Reduces 1 in pipe to 3/4 in for versatile plumbing fit

Specifications

BrandZoro Select

Questions about this item

Will this 1" x 3/4" NPT bushing thread into my existing Class 3000 forged steel piping?

Yes, it meets ANSI B 1.20.1 and ASME B 16.11 standards for NPT threads, matching Class 3000 forged steel systems.

How can I verify the 3000 psi pressure rating after installation?

The ASTM A105 forged steel body is rated for 3000 psi at 72 degrees F; pressure-test the assembled joint to that spec to confirm integrity.

Does the box include any thread sealant or gaskets for the NPT connection?

The package contains only the black forged steel bushing; NPT thread sealant or tape must be purchased separately.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.