We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron 90-degree reducing elbow with female NPT threads

Value Brand

Value Brand 1 in x 3/4 in FNPT Galvanized 90 Degree Reducing Elbow

SKU CH-KNF8-REQQ9

Connects 1-inch and 3/4-inch female NPT pipes at a 90-degree angle in galvanized Class 150 malleable iron

  • Reduces pipe size from 1 in to 3/4 in FNPT
  • 90 degree elbow changes flow direction in tight spaces
  • Galvanized malleable iron resists corrosion for long service life
  • Class 150 pressure rating suits standard plumbing systems
  • New condition ensures clean threads and reliable sealing

ZORO SELECT Galvanized Reducing Elbow

This ZORO SELECT fitting is a galvanized malleable iron 90 degree reducing elbow designed for plumbing connections. It features a 1 inch female NPT inlet and a 3/4 inch female NPT outlet, both threaded to 11 1/2 and 14 threads respectively. The Class 150 rating indicates its pressure suitability for standard water and gas lines. It arrives new and ready for installation in residential or commercial systems.

Installation uses standard NPT threading

Install by applying appropriate thread sealant or tape to the male pipe threads before engaging the female NPT ports. The galvanized coating requires care to avoid damaging the zinc layer during tightening, which could expose the base iron to corrosion. Ensure the 90 degree angle aligns correctly with the piping layout to prevent stress on the joints. Over-tightening malleable iron can crack the fitting, so use proper wrench leverage and stop when the joint feels secure.

Suits plumbers joining dissimilar pipe sizes

This elbow suits installers needing to change direction and reduce pipe diameter from 1 inch to 3/4 inch in a single fitting. It is not for systems requiring a straight coupling or a different thread standard such as BSP. Buyers needing a larger reduction step or a different angle should look at other fitting types. The Proposition 65 warning indicates chemical content relevant to California regulatory compliance.

Highlights

  • Reduces pipe size from 1 in to 3/4 in FNPT
  • 90 degree elbow changes flow direction in tight spaces
  • Galvanized malleable iron resists corrosion for long service life
  • Class 150 pressure rating suits standard plumbing systems
  • New condition ensures clean threads and reliable sealing

Specifications

BrandZORO SELECT

Questions about this item

How can I confirm the elbow is seated correctly after threading it onto the 1 in and 3/4 in FNPT connections?

Tighten each female NPT end until the joint feels firm and the 90 degree bend aligns with your pipe run; a pressure test at the system's working pressure will show no leaks at the threads.

What comes with the ZORO SELECT 5P809 reducing elbow and what extra items are needed for installation?

The box contains the single galvanized malleable iron elbow with 1 in and 3/4 in female NPT threads; you must supply pipe sealant or tape and the mating pipe nipples separately.

Which version of this Class 150 galvanized elbow should I choose for a standard water line?

Select the 1 in x 3/4 in FNPT 90 degree reducing elbow (model 5P809) — it is the only size and class combination offered for this fitting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.