We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten brass hex nipples, 1/8 inch MNPT, Class 150

Value Brand

Value Brand 1/8" MNPT Brass Hex Nipple 10PK

SKU CH-3FDM-HQPYT

Pack of ten brass hex nipples with 1/8 inch MNPT threads rated to 1200 psi

  • TypeOther
  • Ten nipples per pack for multiple installations
  • Brass construction resists corrosion in plumbing systems
  • Rated to 1200 psi for high-pressure applications
  • Operates from -65 to 250 °F across wide temperature ranges
  • Meets SAE and ASME standards for reliable performance

Brass hex nipple pack

This ten-pack of 1/8 inch MNPT brass hex nipples suits plumbers and maintenance crews joining female-threaded pipe or fittings in water, air or inert-gas lines. The Class 150 rating and SAE/ASME standards cover typical low-pressure residential and light-commercial jobs.

Thermals pressure and flow

Brass construction handles a temperature range from minus 65 to 250 degrees Fahrenheit and a maximum pressure of 1200 psi without deformation. The metal-to-metal NPT threads seal with tape or compound and add negligible flow restriction in normal service.

Ten-piece bulk convenience

The package supplies ten identical nipples so a fitter can complete multiple connections or keep spares on the truck. No gaskets, sealant or tools are included, and California Proposition 65 warnings apply to the brass alloy.

Highlights

  • Ten nipples per pack for multiple installations
  • Brass construction resists corrosion in plumbing systems
  • Rated to 1200 psi for high-pressure applications
  • Operates from -65 to 250 °F across wide temperature ranges
  • Meets SAE and ASME standards for reliable performance

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I install a 1/8" MNPT brass hex nipple without cross-threading?

Start the 1/8" MNPT threads by hand for at least two full turns before using a wrench on the 437/1000 in hex; brass is soft and cross-threads easily if forced.

What maintenance or replacement will a Class 150 brass hex nipple need over time?

Inspect for dezincification or stress-corrosion cracks annually; replace the nipple if the threads show white powdery deposits or if leakage appears at the joint.

Which limit appears first when this fitting sees continuous 1200 psi at 250°F?

The 250°F temperature ceiling is reached before the 1200 psi pressure rating becomes critical; sustained heat accelerates brass creep and seal degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.