We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel inline ball valve with butterfly handle

Value Brand

Value Brand 1/4" FNPT x MNPT Stainless Steel Ball Valve Inline

SKU CH-0Y7R-MXY24

1/4" inline ball valve with 316 stainless steel body, PTFE seats and 1000 psi CWP rating

  • TypeOther
  • Full-port design allows unrestricted flow
  • 316 stainless steel body resists corrosion
  • Rated to 1000 psi CWP for high-pressure service
  • Blowout-proof stem enhances operational safety
  • Operates from -40 to 400 degrees F

1/4" FNPT x MNPT Stainless Steel Ball Valve

This quarter-turn ball valve uses 316 stainless steel for the body ball and stem with PTFE seats and seals. It connects a 1/4 inch female NPT thread to a 1/4 inch male NPT thread in an inline two-piece body. The full-port design matches the 1/4 inch hose inside diameter for unrestricted flow.

Installation and common issues

Thread the male end into the female port using pipe sealant or tape rated for stainless steel. The butterfly handle requires minimal clearance to operate through ninety degrees. The blowout-proof stem prevents the stem from ejecting under pressure. Over-tightening can damage threads or distort the PTFE seats causing leaks.

Compatibility checks

Verify that the system pressure does not exceed 1000 psi cold working pressure or 150 psi steam working pressure. Confirm the media temperature stays within minus 40 to 400 degrees Fahrenheit. Ensure the mating pipe threads are 1/4 inch NPT and that the fluid is compatible with 316 stainless steel and PTFE materials.

Highlights

  • Full-port design allows unrestricted flow
  • 316 stainless steel body resists corrosion
  • Rated to 1000 psi CWP for high-pressure service
  • Blowout-proof stem enhances operational safety
  • Operates from -40 to 400 degrees F

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

How do I confirm the valve is sealing correctly after installation?

Pressurise the line up to the 1000 psi CWP rating and check for leaks at the FNPT and MNPT threads; the blowout-proof stem and PTFE seats should hold pressure without weeping.

What comes with the valve and what must I supply?

The valve ships as a single 316 stainless steel inline unit with butterfly handle; you must provide 1/4 in pipe tape or sealant and matching FNPT/MNPT fittings for your piping.

Which pressure and temperature rating should I select for my application?

Choose this model when your system runs up to 1000 psi CWP, 150 psi WSP steam, and between -40 and 400 degrees F; the full-port 1/4 in bore matches those limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.