We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small galvanized steel elbow fitting with threaded ends, 90-degree bend

Value Brand

Value Brand 1/4" FNPT Galvanized 90 Degree Elbow

SKU CH-8976-KD528

Connects 1/4" FNPT pipes at a 90° angle using galvanised forged steel rated to 3000 psi

  • 90-degree turn routes pipe in tight spaces
  • Galvanised forged steel resists corrosion in wet systems
  • FNPT threads seal without welding or special tools
  • Rated 3000 psi at 72 °F for high-pressure lines
  • Meets ANSI B1.20.1, ASME B16.11 and ASTM A105 standards

1/4" FNPT Galvanized Elbow

This 90-degree elbow connects two female NPT threads in a compact right-angle turn. It is built for plumbing and compressed-air lines that require a Class 3000 forged-steel fitting. The galvanized coating adds corrosion resistance for water, air or oil service. Installers who need a durable, standards-compliant corner joint will find it suitable.

3000 psi pressure rating

The fitting is rated for 3000 psi at 72 degrees F, giving ample headroom for most shop air and hydraulic circuits. Pressure capacity drops as temperature rises above the reference point, so high-temperature steam or thermal-oil systems may exceed its safe limit. It is not intended for applications that demand a higher class or a larger bore.

Forged steel with ANSI and ASME compliance

The body meets ANSI B1.20.1, ASME B16.11 and ASTM A105 standards, ensuring consistent thread quality and material integrity. Galvanized forged steel resists mechanical damage better than cast alternatives, though the coating can wear in abrasive slurry service. The FNPT threads seal with tape or compound and require no special tools beyond standard pipe wrenches.

Highlights

  • 90-degree turn routes pipe in tight spaces
  • Galvanised forged steel resists corrosion in wet systems
  • FNPT threads seal without welding or special tools
  • Rated 3000 psi at 72 °F for high-pressure lines
  • Meets ANSI B1.20.1, ASME B16.11 and ASTM A105 standards

Specifications

BrandZoro Select

Questions about this item

Will the 1/4" FNPT threads on this galvanized elbow mate with my existing Class 3000 steel piping?

Yes, the elbow is built to ANSI B 1.20.1 and ASME B 16.11 standards, so its 1/4" FNPT threads are compatible with other Class 3000 forged-steel fittings of the same size.

How can I verify the elbow is rated for the 3000 psi working pressure after installation?

Confirm the system operates at or below 72 °F and inspect the joint for leaks under test pressure; the fitting carries the ASTM A105 / SA105 marking that certifies the 3000 psi rating at that temperature.

Does the package include thread sealant or additional fittings, or must I buy them separately?

Only the single 90-degree galvanized forged-steel elbow is supplied; pipe-thread sealant, tape, and any mating nipples or couplings are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.