We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel 90 degree elbow with socket weld ends

Value Brand

Value Brand 1/2" Socket Weld 316 SS 90° Elbow

SKU CH-095F-SEDVJ

A 90-degree socket-weld elbow in 316 stainless steel rated for Class 3000 service

  • Corrosion-resistant piping with 316 stainless steel construction
  • Secure socket-weld joints rated for Class 3000 service
  • Efficient 90-degree flow redirection in a 1/2-inch fitting
  • Compact design with 14-millimetre socket depth for tight spaces
  • Compliant component flagged under California Proposition 65 requirements

Application Fit

This 90 degree elbow connects two 1/2 inch socket-weld pipes in systems that require a right-angle turn. It suits plumbing, hydraulic and industrial lines where stainless steel is specified for corrosion resistance. Builders needing a different angle, a threaded connection or a larger bore should select another fitting.

Material & Rating

The body is 316 stainless steel rated to Class 3000 for high-pressure service. The alloy resists chemical attack and meets the material demands of aggressive fluid handling. No pressure, temperature or flow figures beyond the class rating are supplied.

Installation Notes

Socket-weld ends require a fillet weld around each pipe insertion, so welding equipment and qualified technique are necessary. The fitting adds 14 mm to each joint centre-line and contains no gaskets or seals. California Proposition 65 warnings apply to this product.

Highlights

  • Corrosion-resistant piping with 316 stainless steel construction
  • Secure socket-weld joints rated for Class 3000 service
  • Efficient 90-degree flow redirection in a 1/2-inch fitting
  • Compact design with 14-millimetre socket depth for tight spaces
  • Compliant component flagged under California Proposition 65 requirements

Specifications

BrandZoro Select

Questions about this item

How do I install the 1/2 inch socket-weld 90 degree elbow and what step is often missed?

Clean the pipe end, insert it fully into the 14 mm socket, then weld around the joint; the step often missed is confirming full insertion before welding.

What maintenance or replacement will the 316 stainless steel Class 3000 elbow need later?

Inspect the weld and threads periodically for corrosion or cracking; replace the fitting if any pitting, leakage or structural damage appears.

What limit appears first on the 316 stainless steel elbow under sustained pressure and temperature?

The Class 3000 pressure rating defines the maximum allowable working pressure; exceeding it risks permanent deformation or failure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.