We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC ball valve union with lever handle, 1/2 inch socket connections

Value Brand

Value Brand 1/2" PVC Ball Valve Union

SKU CH-AZ3D-KHFXP

A 1/2-inch PVC ball valve with true-union socket connections, full port flow, 225 psi rating and PTFE seats for 32 to 140 °F service

  • TypeOther
  • Full-port design allows unrestricted flow
  • PVC body resists corrosion in water systems
  • PTFE seats provide reliable sealing
  • Operates from 32 to 140 degrees Fahrenheit
  • Rated for 225 psi cold working pressure

True Union Ball Valve PVC 1/2

The Value Brand 1/2 inch PVC ball valve union is an inline true union fitting designed for plumbing systems requiring reliable shut-off. Its socket and FNPT connections allow straightforward integration into existing pipework without specialised tools. The full-port design maintains consistent flow while the lever handle provides clear on-off indication. This new component suits residential and light commercial water installations.

Installers needing chemical-resistant shut-off

Plumbers and maintenance teams handling potable water or mild chemical lines will appreciate the PVC body, PTFE seats and EPDM seals that resist corrosion. The valve operates between 32 and 140 degrees Fahrenheit at pressures up to 225 psi CWP. It is not intended for high-temperature steam, compressed air or aggressive solvent service where metal-bodied valves are specified. Buyers requiring larger diameters or flanged ends must select a different model.

225 psi CWP pressure rating decides fit

The maximum working pressure of 225 psi CWP is the single figure that determines whether this valve matches the system design. Verify that the operating pressure stays below this limit across the full 32 to 140 degree Fahrenheit temperature range. Exceeding the rating risks seal failure and leaks, so confirm the specification before purchase.

Highlights

  • Full-port design allows unrestricted flow
  • PVC body resists corrosion in water systems
  • PTFE seats provide reliable sealing
  • Operates from 32 to 140 degrees Fahrenheit
  • Rated for 225 psi cold working pressure

Specifications

BrandZORO SELECT
TypeOther

Questions about this item

What pipe size and connection type does this 1/2" PVC ball valve union require for installation?

The valve fits 1/2 inch pipe with Socket/FNPT x Socket/FNPT connections, allowing solvent-weld socket or threaded FNPT joints on each end.

How is the true union valve assembled, and which step do installers often miss?

The 2-piece inline true union body threads together; the step often missed is seating the EPDM body seal between the union nut and body before tightening to prevent leaks.

When should the PTFE seats or EPDM body seal be replaced on this valve?

Replace the PTFE seats or EPDM seal if the lever handle develops drip-tight leakage or the valve fails to shut off fully within the 32 to 140 degree F operating range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.