We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel pipe, 1/2 inch MNPT, 6 ft TBE, Sch 40

Value Brand

Value Brand 1/2" MNPT x 6 ft TBE Black Pipe Sch 40

SKU CH-93N2-TR2A1

Schedule 40 black steel pipe with 1/2 inch male NPT threads on both ends, rated for 1715 psi at 650 degrees F for air, gas, oil, steam and non-potable water

  • Rated for air, gas, oil, water and steam service
  • Black steel construction with welded seam for strength
  • Schedule 40 wall rated to 1715 psi at 650 °F
  • 1/2 inch MNPT threads fit Class 150 fittings
  • Operates from -20 °F to 600 °F

Half-inch threaded pipe for air, gas, oil and steam

This 1/2 inch nominal steel pipe carries air, natural gas, non-potable water, oil and steam. It is manufactured to Schedule 40 wall thickness from Grade B welded steel with a black finish. The 6 foot length ships with male NPT threads on both ends ready for Class 150 fittings.

Welded steel construction rated for high pressure

The pipe withstands 1715 psi at 650 degrees F for both liquid and steam service. Operating range spans minus 20 to 600 degrees F. Inside diameter measures 39/64 inch. Global sourcing and black coating suit industrial and commercial piping runs.

Replaces lighter tubing

Builders upgrading from unrated hose or thinner-wall pipe gain the 1715 psi rating and 600 degree F limit. The jump is worth it when the system sees steam, high-pressure air or oil at elevated temperature. Not for potable water or gravity-flow installations.

Highlights

  • Rated for air, gas, oil, water and steam service
  • Black steel construction with welded seam for strength
  • Schedule 40 wall rated to 1715 psi at 650 °F
  • 1/2 inch MNPT threads fit Class 150 fittings
  • Operates from -20 °F to 600 °F

Specifications

BrandZORO SELECT

Questions about this item

What does the 1/2" MNPT thread on this pipe connect to in practice?

The 1/2" MNPT thread mates with Class 150 female fittings for air, natural gas, non-potable water, oil or steam service.

What clearance and support does a 6 ft length of 1/2" Schedule 40 black steel pipe require?

The pipe has a 39/64 in inside diameter and welded steel construction; it must be supported per code for its 1715 psi rating at 650 °F.

How is this TBE pipe installed, and what step is often missed?

Thread each MNPT end into Class 150 fittings with sealant approved for 600 °F service; the step often missed is confirming the fitting class matches the 150 rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.