We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel pipe, half inch MNPT, three feet long, threaded both ends

Value Brand

Value Brand 1/2" MNPT x 3 ft TBE Black Pipe Sch 40

SKU CH-3Q2C-XZ1GZ

Schedule 40 steel pipe with 1/2" MNPT threaded ends for air, gas, oil, steam and non-potable water up to 1715 psi at 650 °F

  • 1/2 in nominal size fits standard fittings
  • Schedule 40 steel rated to 1715 psi at 650 °F
  • Suitable for air, natural gas, oil and non-potable water
  • Welded Grade B steel construction for durability
  • 3 ft length with male NPT threads ready to install

1/2 in Schedule 40 Steel Pipe

This 3 ft black steel pipe has a nominal size of 1/2 in and an inside diameter of 39/64 in. It is manufactured to Schedule 40 dimensions with welded construction from Grade B steel. The pipe carries a black coating and is rated for a maximum operating pressure of 1715 psi at 650 Degrees F.

Thread Compatibility and Media

Both ends feature 1/2 in MNPT threads for Class 150 fitting compatibility. The pipe is approved for air, natural gas, non-potable water, oil and steam service. Operating temperature range spans -20 Degrees F to 600 Degrees F with a maximum steam pressure of 1715 psi.

Replaces Worn Black Pipe Runs

This length replaces corroded or leaking sections of 1/2 in Schedule 40 black pipe in existing distribution systems. The upgrade is worth it when the current pipe shows thread damage, internal scaling or wall thinning that compromises the 1715 psi rating. It is not for potable water lines or gravity-flow drainage installations.

Highlights

  • 1/2 in nominal size fits standard fittings
  • Schedule 40 steel rated to 1715 psi at 650 °F
  • Suitable for air, natural gas, oil and non-potable water
  • Welded Grade B steel construction for durability
  • 3 ft length with male NPT threads ready to install

Specifications

BrandZORO SELECT

Questions about this item

Does the pipe come with any fittings or thread sealant, or must I buy those separately?

The pipe is supplied as a single 3 ft length with male NPT threads on both ends; no couplings, nipples or thread sealant are included, so you will need to purchase compatible Class 150 fittings and sealant separately.

The catalogue shows only this 3 ft length — are other lengths available for the same 1/2 in nominal size?

Only the 3 ft TBE length is listed for this ZORO SELECT 583-360 model; if you need a different length you would have to source another pipe or cut and re-thread this one.

The pipe is rated 1715 psi at 650 °F — what does that mean for a standard residential steam system running at 15 psi?

The 1715 psi rating is the maximum design pressure at 650 °F; at typical low-pressure steam conditions of 15 psi the pipe wall is far below its stress limit, so the rating confirms ample safety margin for that service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.