Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00920377BTC
In stock
Value Brand
Value Brand 1/2" MNPT Brass Tee Class 150
A 1/2-inch male NPT brass tee rated Class 150 connects three pipe ends
- TypeOther
- Class 150 rating handles standard plumbing pressures
- Brass construction resists corrosion in water lines
- Three 1/2 in male NPT ports simplify branching
- Gray finish identifies the fitting at a glance
- Prop 65 notice discloses regulated chemical content
Brass Tee for Plumbing Systems
This Value Brand brass tee is a Class 150 pipe fitting designed to join three sections of 1/2 inch male NPT threaded pipe. It provides a reliable connection point for water, gas or air distribution in residential and commercial installations. The brass construction resists corrosion and handles typical system pressures. California Proposition 65 warnings apply for cancer and reproductive harm.
Installers needing a 1/2 inch male NPT branch
Suited for plumbers and maintenance crews assembling or repairing threaded piping networks that require a tee with three male ends. Not intended for systems that demand female-threaded ports, sweat connections or press-fit joints. Builders needing larger diameters, different pressure classes or alternative materials should select another fitting.
Class 150 pressure rating
The fitting is rated to Class 150, which defines its maximum allowable working pressure for the intended service. Confirm that this rating matches the design pressure of your piping system before installation. The number 14 appears in the supplier data for each port description. Always verify compatibility with local codes and the specific fluid being conveyed.
Highlights
- Class 150 rating handles standard plumbing pressures
- Brass construction resists corrosion in water lines
- Three 1/2 in male NPT ports simplify branching
- Gray finish identifies the fitting at a glance
- Prop 65 notice discloses regulated chemical content
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
What does the Class 150 rating mean once this tee is installed in a plumbing system?
Class 150 indicates the pressure rating for this brass tee, meaning it is designed to handle up to 150 psi in water, oil, or gas lines at ambient temperature.
How does the 1/2 inch MNPT connection affect compatibility with other fittings?
The 1/2 inch Male National Pipe Taper threads create a sealed joint when screwed into matching female NPT ports, and the taper ensures a tight fit without separate gaskets.
What physical space is needed to thread this tee into an existing pipe network?
You need enough clearance to rotate the tee fully onto 1/2 inch female NPT threads on all three branches, plus room for a wrench on the hexagonal body.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
