Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00919296BTC
In stock
Value Brand
Value Brand 1-1/4" Sweat Brass Ball Valve Inline
A two-piece brass ball valve with a full-port chrome-plated ball rated for 600 psi water and 150 psi steam
- TypeOther
- Full-port design maintains unrestricted flow
- Chrome-plated brass ball resists corrosion and wear
- Rated 600 psi for high-pressure water and air systems
- 150 psi steam rating supports heating applications
- Vacuum service rated to 29.9 in Hg for negative-pressure lines
1-1/4" Sweat Brass Ball Valve Inline
This full-port ball valve handles air, oil, steam and water in residential or light-commercial plumbing systems. The two-piece brass body with a chrome-plated brass ball provides straight-through flow for 1-1/4 inch nominal pipe size. A non-locking lever handle allows quick manual shut-off. It is rated for 600 psi operating pressure and 150 psi steam pressure.
Check pipe size and media compatibility
Verify that the existing copper tubing matches the 1-1/4 inch nominal size for sweat connections. Confirm the system pressure does not exceed 600 psi or 150 psi for steam service. The valve is not rated for combustible gas and carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm. Ensure local codes permit brass valves for the intended application.
Brass construction with sweat ends
The two-piece brass body and chrome-plated ball resist corrosion from water, oil and steam in daily use. Sweat ends require soldering during installation, creating a permanent leak-free joint when done correctly. The straight body style fits inline without extra fittings. A vacuum rating of 29.9 in Hg supports evacuation tasks. The non-locking handle stays in position but can be turned quickly in an emergency.
Highlights
- Full-port design maintains unrestricted flow
- Chrome-plated brass ball resists corrosion and wear
- Rated 600 psi for high-pressure water and air systems
- 150 psi steam rating supports heating applications
- Vacuum service rated to 29.9 in Hg for negative-pressure lines
Specifications
| Brand | ZORO SELECT |
|---|---|
| Type | Other |
Questions about this item
What comes with the valve and do I need to buy solder or fittings separately?
The package contains the brass ball valve only; sweat installation requires copper pipe, flux and solder which are not included.
Should I choose the 600 psi or 150 psi rating for my system?
Use the 600 psi rating for general air, oil or water lines and the 150 psi rating when the valve will see steam service.
What does the 29.9 in Hg vacuum rating mean once the valve is installed?
It indicates the valve will maintain a seal down to a near-perfect vacuum of 29.9 inches of mercury.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
