We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC ball valve union with lever handle, 1-1/4 inch socket ends

Value Brand

Value Brand 1-1/4" Socket PVC Ball Valve Union

SKU CH-WHG3-C55R2

Manual two-way ball valve controls water flow with a PVC body rated for 225 psi maximum pressure

  • TypeOther
  • PVC body resists corrosion for water service
  • Lever handle enables quick manual shut-off
  • Two-piece construction simplifies inline maintenance
  • Rated to 225 psi for standard pressure lines
  • Prop 65 warning lists chemical hazards

1-1/4" PVC Ball Valve for Water Lines

This 1-1/4 inch PVC ball valve union controls water flow in residential and light-commercial plumbing. The straight, two-piece body uses a standard-port PVC ball and a lever handle for manual two-way operation. It is rated for a maximum operating pressure of 225 psi and carries a California Proposition 65 warning for listed chemicals. The valve is not rated for steam, combustible gas or vacuum service.

Socket Ends Simplify Solvent-Weld Installation

The socket connections are designed for solvent welding directly onto 1-1/4 inch PVC pipe, requiring primer and cement for a permanent joint. The two-piece construction allows the union nut to be removed for easier alignment during assembly. Common issues include leaks from insufficient cement coverage or misaligned pipes that stress the union seal. The non-locking lever handle can be accidentally bumped, so verify handle orientation after installation.

Verify Pipe Schedule and Chemical Compatibility

Confirm that your existing piping uses the same 1-1/4 inch nominal size and compatible PVC schedule before ordering. The valve is intended for water media only; do not use it for steam, compressed air or chemical lines unless the fluid is confirmed compatible with PVC and standard-port materials. Ensure the system operating pressure stays below the 225 psi rating and that local codes permit solvent-welded PVC ball valves in the planned location.

Highlights

  • PVC body resists corrosion for water service
  • Lever handle enables quick manual shut-off
  • Two-piece construction simplifies inline maintenance
  • Rated to 225 psi for standard pressure lines
  • Prop 65 warning lists chemical hazards

Specifications

BrandZoro Select
TypeOther

Questions about this item

How do I confirm the ball valve is operating correctly after installation?

Pressurise the line with water up to 225 psi and check that the lever handle turns smoothly with no leakage at the socket joints.

What comes in the box and what must be purchased separately?

The box contains the PVC ball valve union with lever handle; PVC solvent cement, primer and 1-1/4 in pipe must be bought separately for the socket connections.

Which valve version should I choose for a 1-1/4 inch water line?

Select this two-piece straight body valve with standard port when you need a 1-1/4 in nominal size rated for 225 psi water service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.