We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 90-degree elbow with FNPT threads

Value Brand

Value Brand 1-1/2" FNPT Galvanized 90 Degree Elbow

SKU CH-FD9Z-KB60N

Connects pipes at a 90-degree angle with Class 300 galvanized malleable iron rated to 1500 psi

  • Galvanised malleable iron resists corrosion for long service life
  • 90-degree FNPT elbow redirects flow in tight plumbing layouts
  • Class 300 rating handles 1500 psi at 150 °F for demanding systems
  • FM Approved and UL Listed confirm compliance with recognised safety standards
  • Meets ASME B 16.3, B 16.4, ASTM A-197 and A47 specifications

Galvanized 90° Elbow for 1-1/2" FNPT

This galvanized malleable iron elbow redirects flow by 90 degrees in piping systems using female National Pipe Thread connections. It suits installers who need a Class 300 fitting rated for 1500 psi water, oil or gas at 150 °F and 300 psi saturated steam. The component meets ASME B 16.3, B 16.4, ASTM A-197 and A47 standards with FM and UL listings.

No accessories or software included

The product ships as a single fitting without gaskets, sealant, tools or documentation beyond the compliance markings. Buyers must source thread sealant, compatible nipples or pipes and any required permits separately. This absence means the installer controls the joint preparation and code compliance for each specific application.

Class 300 malleable iron with FNPT threads

The galvanized coating resists corrosion in water, oil and gas service while the FNPT threads accept standard male NPT components without adapters. Rated for 1500 psi WOG and 300 psi steam, the fitting handles demanding pressure conditions within its temperature limit. The 90° sweep changes direction cleanly in tight runs where a street elbow would not fit.

Highlights

  • Galvanised malleable iron resists corrosion for long service life
  • 90-degree FNPT elbow redirects flow in tight plumbing layouts
  • Class 300 rating handles 1500 psi at 150 °F for demanding systems
  • FM Approved and UL Listed confirm compliance with recognised safety standards
  • Meets ASME B 16.3, B 16.4, ASTM A-197 and A47 specifications

Specifications

BrandZORO SELECT

Questions about this item

Will the galvanized malleable iron fitting need re-coating or replacement due to corrosion over time?

The galvanized malleable iron construction resists corrosion under normal water service; re-coating is not required unless the zinc layer is mechanically damaged during installation.

What pressure limit governs continuous operation at the rated 150 °F temperature?

The Class 300 rating allows a maximum working pressure of 1500 psi at 150 °F WOG, so sustained use must stay at or below that figure.

Does the fitting generate heat or noise when pressurised steam flows through it all day?

As a passive 90-degree elbow it adds no heat or noise; the only thermal effect is the fluid temperature itself, rated up to 300 psi saturated steam.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.