We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminum cam and groove coupling with locking arm, 1-1/2 inch NPT female thread

Value Brand

Value Brand 1-1/2" Aluminum Cam and Groove Coupling

SKU CH-F23J-QDQ57

Aluminum cam-and-groove coupling connects 1-1/2 in FNPT hose at 250 psi with nitrile gasket and locking arm

  • Aluminum body resists corrosion for long service life
  • Type D socket with NPT threads enables quick hose connections
  • 250 psi working pressure at 70 °F handles demanding fluid transfer
  • Nitrile gasket seals reliably across a wide temperature range
  • Integrated locking arm secures the coupling without extra tools

1-1/2" Aluminum Cam and Groove Coupling

This aluminium Type D coupling joins a 1-1/2 inch hose to a 1-1/2 inch FNPT thread. It suits fluid-transfer lines in agricultural, industrial and general plumbing work where a quick, tool-free connection is required. The nitrile gasket and 250 psi rating at 70 F support water, oil and compatible chemical media. The 2 13/16 inch overall length keeps the assembly compact.

Quick-lock installation with arm and gasket

The built-in locking arm snaps over the cam levers without tools, and the pre-fitted nitrile gasket seals on contact. Misalignment during insertion is the most common cause of leaks, so press the hose squarely into the socket before closing the arms. Overtightening the NPT thread can strip the aluminium; hand-tight plus one turn with a strap wrench is sufficient. Check the gasket for cuts after every disconnect.

Verify thread, pressure and chemical compatibility

Confirm the mating port is 1-1/2 inch NPT and that system pressure never exceeds 250 psi at 70 F. Ensure the conveyed fluid is compatible with aluminium and nitrile; some solvents and strong acids attack both materials. The coupling carries a Proposition 65 warning for chemicals known to cause cancer and reproductive harm, so review local handling requirements before use. The 2 1/8 inch socket inside diameter must clear your hose barb.

Highlights

  • Aluminum body resists corrosion for long service life
  • Type D socket with NPT threads enables quick hose connections
  • 250 psi working pressure at 70 °F handles demanding fluid transfer
  • Nitrile gasket seals reliably across a wide temperature range
  • Integrated locking arm secures the coupling without extra tools

Specifications

BrandZORO SELECT

Questions about this item

How do I verify the 250 psi rating at 70 F is holding after installation?

Pressurize the line to the 250 psi working pressure at 70 F and check the nitrile gasket and locking arms for leaks or movement.

What comes with the Type D aluminum coupling and what must I supply?

The coupling includes locking arms and a nitrile gasket; you must supply the matching 1-1/2 in male cam adapter and any thread sealant for the NPT connection.

Which size should I choose for a 1-1/2 in hose and NPT thread?

Select the 1-1/2 in coupling with 1-1/2 in -11-1/2 NPT thread to match both the hose fitting size and the female NPT connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.