We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ABS gate valve with black lever handle and slip connections

Valterra

Valterra 7101GR Gate Valve 1-1/2 in Slip ABS Class 125

SKU CH-D24G-9GC4R MPN 7101GR

ABS gate valve with slip connections controls water flow up to 45 psi using a rising stainless-steel stem and polypropylene wedge

  • TypeDrain Components
  • MaterialHAWA
  • Controls water flow with a 45 psi rating
  • Rising stem in 304 stainless steel for smooth operation
  • Solid polypropylene wedge resists corrosion
  • TPE seal and polypropylene seat ensure tight shut-off
  • Slip-fit ABS connections simplify installation

ABS Gate Valve for Water Lines

The Valterra 7101GR is a 1-1/2 inch slip-connection gate valve built from ABS with a welded bonnet. It uses a rising stem made of 304 stainless steel and a solid polypropylene wedge. The lever handle opens and closes the valve in water systems rated for 45 psi.

Installers Needing a Straight-Shutoff Fitting

This valve suits plumbers and maintenance crews who need a simple on-off control in low-pressure water piping. The slip sockets allow direct solvent welding to ABS pipe without threading tools. It is not for steam service above 45 psi, nor for systems that require a union or flanged connection for removal.

Class 125 Pressure Rating at 45 psi

The ANSI Class 125 designation confirms the valve body is rated for 45 psi maximum operating pressure in water applications. Exceeding this pressure risks body failure or seal leakage. Verify the system design pressure before installation.

Highlights

  • Controls water flow with a 45 psi rating
  • Rising stem in 304 stainless steel for smooth operation
  • Solid polypropylene wedge resists corrosion
  • TPE seal and polypropylene seat ensure tight shut-off
  • Slip-fit ABS connections simplify installation

Specifications

TypeDrain Components
MaterialHAWA
BrandValterra
Model7101GR

Questions about this item

What is the maximum operating pressure this gate valve can handle?

The valve is rated for a maximum operating pressure of 45 psi.

What stem material is used and how does it affect heat or corrosion resistance?

The stem is made from 304 stainless steel, which resists corrosion and handles typical water temperatures in plumbing systems.

Which pipe size and connection type must the existing plumbing have for this valve to fit?

It requires a 1-1/2 inch slip connection on both the inlet and outlet sides.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.