We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC gate valve with grey lever handle, slip connections, Class 125

Valterra

Valterra 6401GR Gate Valve 4 in Slip Class 125

SKU CH-BR0H-SP5RK MPN 6401GR

A 4-inch slip PVC gate valve rated for 15 psi water service with a 304 stainless steel rising stem and TPE seal

  • TypeDrain Components
  • Solid 304 stainless steel wedge resists corrosion
  • Rising stem design gives clear visual position indication
  • TPE seals handle water up to 15 psi operating pressure
  • Welded PVC bonnet prevents leak paths
  • Slip connections install quickly without threading tools

4 in Slip Gate Valve

The Valterra 6401GR is a PVC gate valve designed for water media in plumbing installations. It carries a Class 125 rating and uses a slip connection on both female ends for solvent-weld assembly. The rising stem and solid wedge are made from 304 stainless steel for corrosion resistance.

Suits low-pressure water lines

This valve operates at a maximum of 15 psi for both water and steam service, so it fits residential irrigation, pool equipment or gravity-fed systems. Installations that require higher working pressures or threaded, flanged or compression connections will need a different valve design.

15 psi maximum operating pressure

The 15 psi limit is the single figure that determines whether this valve matches the system requirements. If the circuit regularly exceeds that pressure the valve is not suitable, regardless of pipe size or material compatibility.

Highlights

  • Solid 304 stainless steel wedge resists corrosion
  • Rising stem design gives clear visual position indication
  • TPE seals handle water up to 15 psi operating pressure
  • Welded PVC bonnet prevents leak paths
  • Slip connections install quickly without threading tools

Specifications

TypeDrain Components
BrandValterra
Model6401GR

Questions about this item

What comes with the Valterra 6401GR gate valve and what must be purchased separately?

The valve body, rising stem, solid wedge, lever handle and welded bonnet are supplied as one assembled unit. Slip connections require PVC pipe and solvent cement, which are not included.

How do I choose between the available versions of this valve?

This listing is for a single configuration: 4-inch slip connections, Class 125, PVC body with 304 stainless steel stem, wedge and seat. No alternative sizes, pressure classes or trim materials are offered.

What does the 15 psi operating pressure mean when the valve is installed in a water system?

It indicates the maximum continuous water pressure the valve can handle at ambient temperature. The same 15 psi limit applies to steam service, so the valve is suited only for low-pressure drain or vent lines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.