We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVC gate valve with lever handle and slip spigot connections

Valterra

Valterra 6202GR Gate Valve 2 in Slip x Spigot Class 125

SKU CH-JP98-BQ381 MPN 6202GR

PVC gate valve for water lines with a 2‑inch slip‑by‑spigot connection, rising 304 stainless‑steel stem and solid polypropylene wedge rated to 40 psi

  • TypeDrain Components
  • MaterialHAWA
  • Reliable water control with 40 psi pressure rating
  • Corrosion-resistant 304 stainless steel stem for durability
  • Leak-tight TPE seal ensures secure connections
  • Easy operation via lever handle design
  • PVC body with welded bonnet for strength

PVC gate valve for water systems

This 2-inch PVC gate valve handles water media at up to 40 psi operating and steam pressure. The slip-by-spigot connection joins solvent-weld and plain-end pipe without flanges. A rising stem shows valve position at a glance.

Installers needing visible open/closed indication

Suited for maintenance crews who must confirm valve state quickly. Not suited for high-pressure mains or throttling service. Buyers requiring flange bolt patterns or non-rising stems should look elsewhere.

Rising stem with solid polypropylene wedge

The 304 stainless-steel stem lifts a solid polypropylene wedge against polypropylene seats sealed with TPE. Welded PVC bonnet and lever handle complete the Class 125 assembly.

Highlights

  • Reliable water control with 40 psi pressure rating
  • Corrosion-resistant 304 stainless steel stem for durability
  • Leak-tight TPE seal ensures secure connections
  • Easy operation via lever handle design
  • PVC body with welded bonnet for strength

Specifications

TypeDrain Components
MaterialHAWA
BrandValterra
Model6202GR

Questions about this item

How can I confirm the Valterra 6202GR gate valve is operating correctly after installation?

With water flowing, move the lever handle through its full travel; the rising 304 stainless-steel stem should lift visibly and the solid polypropylene wedge must seat against the polypropylene seats with a TPE seal, showing no leakage at up to 40 psi.

What components are included with the Valterra 6202GR and what must I supply separately?

The valve body, welded PVC bonnet, rising stem, lever handle and internal wedge and seat assemblies are supplied; you must provide 2-inch slip-fitting pipe for the female side, a 2-inch spigot-fitting pipe for the male side, and PVC solvent cement for both joints.

Which Valterra 6202GR version should I choose for a standard 2-inch PVC drain line?

Select the 6202GR model with 2-inch nominal size, Class 125 rating, slip-by-spigot connections and a 40 psi pressure limit; it matches typical residential drain piping without requiring flanged or threaded adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.