We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
PVC gate valve with lever handle and spigot connections

Valterra

Valterra 4303GR 3 In. Class 125 Spigot Gate Valve

SKU CH-D1Z2-P30NA MPN 4303GR

A 3-inch PVC gate valve with a rising 304 stainless-steel stem and lever handle rated for 30 psi water service

  • TypeDrain Components
  • MaterialHAWA
  • Rising stem with 304 stainless steel for smooth operation
  • Solid 304 stainless steel wedge resists corrosion
  • TPE seal material provides reliable shut-off
  • Welded PVC bonnet ensures structural integrity
  • Rated 30 psi water and 15 psi steam service

3 Inch PVC Gate Valve

The Valterra 4303GR is a 3 inch gate valve built from PVC with 304 stainless steel stem and wedge. It uses a spigot connection on both male ends and carries a Class 125 rating. The valve is designed for water media in drain and trap installations.

Suits low-pressure water lines

This valve fits gravity-fed or low-head water systems where operating pressure stays at or below 30 psi and steam pressure does not exceed 15 psi. It is not intended for high-pressure mains, compressed air or hot-steam service above the rated limit.

30 psi maximum operating pressure

The 30 psi operating ceiling is the single figure that decides whether this valve matches the system. Exceeding it risks seat damage and leakage, so confirm the line pressure before specifying this part.

Highlights

  • Rising stem with 304 stainless steel for smooth operation
  • Solid 304 stainless steel wedge resists corrosion
  • TPE seal material provides reliable shut-off
  • Welded PVC bonnet ensures structural integrity
  • Rated 30 psi water and 15 psi steam service

Specifications

TypeDrain Components
MaterialHAWA
BrandValterra
Model4303GR

Questions about this item

What pipe size does the 3 in spigot end fit?

The valve has a 3 in nominal size with a male spigot connection that slides into a 3 in PVC fitting socket.

How is the rising-stem gate valve installed and what step is often missed?

Apply PVC primer and cement to the spigot and fitting, push fully home, then rotate the lever to verify the stainless-steel wedge travels freely.

Which seal or wear part will need replacement after extended service?

The TPE seat seal and the 304 stainless-steel wedge are the components that wear and can be replaced during maintenance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.