We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey PVC gate valve with hand wheel handle, 2 inch slip connection

Valterra

Valterra 4201GR 2 in PVC Gate Valve Trap

SKU CH-AHNB-XX0B5 MPN 4201GR

PVC gate valve with slip connection rated for 40 psi and 167 degrees Fahrenheit

  • TypeDrain Components
  • MaterialHAWA
  • Reliable flow control backed by Class 125 valve rating
  • Secure slip connection simplifies 2 in PVC pipe installation
  • Corrosion-resistant operation with 304 stainless steel stem and wedge
  • Handles hot water up to 167 Degrees F for versatile use
  • Meets MSS SP-70 standard for proven plumbing performance

2-inch PVC Gate Valve Slip Connection

The Valterra 4201GR is a Class 125 PVC gate valve with a 2-inch slip connection. It uses a rising stem made of 304 stainless steel and a bonded bonnet. The hand-wheel handle is PVC and the wedge is also 304 stainless steel. Maximum working pressure is 40 psi at a fluid temperature of 167 Degrees F.

Suits 2-inch PVC drain lines needing positive

Installers fitting a 2-inch PVC drain line who need a full-bore shut-off will find the slip connection and rising-stem design convenient. The valve meets MSS SP-70 and carries a 40 psi CWP rating. Systems that require a higher pressure rating, a threaded or flanged connection, or a non-rising stem should use a different valve.

Class 125 rating with 40 psi CWP decides fit

The single specification that determines suitability is the Class 125 rating combined with a 40 psi cold water pressure limit. If the installation operates above 40 psi or demands a higher class rating, this valve will not meet the requirement. Verify the system pressure before selecting this part.

Highlights

  • Reliable flow control backed by Class 125 valve rating
  • Secure slip connection simplifies 2 in PVC pipe installation
  • Corrosion-resistant operation with 304 stainless steel stem and wedge
  • Handles hot water up to 167 Degrees F for versatile use
  • Meets MSS SP-70 standard for proven plumbing performance

Specifications

TypeDrain Components
MaterialHAWA
BrandValterra
Model4201GR

Questions about this item

What size slip-fit pipe do I already need on site for the 2 in connection?

The valve uses a 2 in slip connection, so a matching 2 in PVC pipe end must be present for solvent-weld installation.

Will the 40 psi pressure rating and 167 °F temperature limit suit my existing cold-water lines?

Yes, the Class 125 body is rated for 40 psi CWP and fluid temperatures up to 167 °F, covering typical residential cold-water service.

How can I confirm the rising stem is operating correctly after assembly?

Turn the hand wheel and watch the stainless steel stem rise visibly; the gate should lift clear of the 3 1/2 in flow path when fully open.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.