We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White square lay-in ceiling speaker with recessed grille and Ethernet port

Valcom, Inc

Valcom, Inc VIP-422A 2' x 2' IP Ceiling Speaker

SKU CH-P5HT-J109W MPN VIP-422A

An 8-inch IP ceiling speaker with PoE power, two-way talkback and 103 dB output for paging and emergency alerts

  • Frequency Response80 Hz to 15 kHz
  • Connectors10/100 Mbps Ethernet Manual or Dynamic Host Configuration Pr
  • Power SupplyPOWER REQUIREMENTS: Power over Ethernet (POE) 802.3af compat
  • Dimensions & WeightDimensions: 23.75in L x 23.75in W x 3.75in D (60.33cm) x (60
  • Clear two-way talkback intercom
  • PoE 802.3af removes need for local power
  • 103 dB output at one metre for wide coverage
  • 80 Hz to 15 kHz frequency range for clear speech
  • 75 in square lay-in tile fits standard ceiling grid

IP Ceiling Speaker for Paging and Talkback

The Valcom VIP-422A is a 2' x 2' lay-in ceiling speaker that connects through a single 10/100 Mbps Ethernet port. It supports concurrent SIP and multicast paging, emergency alerts and two-way talkback intercom. Power over Ethernet 802.3af supplies the unit, so no local mains connection is required. The 8-inch driver delivers a frequency response of 80 Hz to 15 kHz at 103 dB SPL at one metre.

Network and Ceiling Checks Before Ordering

Your infrastructure must provide IEEE 802.3af PoE on the switch port that will feed the speaker. The ceiling grid needs a 23.75-inch square opening and enough plenum depth for the 3.75-inch housing. Verify that DHCP or manual IP assignment matches your VLAN scheme and that NTP time sync is reachable. The line-level output and mute contacts are wired through the rear connector block for optional amplified zones.

Suited for Indoor Announcement Systems.

Facilities that need reliable voice paging, scheduled tones and hands-free talkback in offices, schools or corridors will fit this speaker. It is indoor-only and rated for speech intelligibility rather than full-range music reproduction. Installers who lack PoE switching or who require weather-resistant outdoor coverage should consider other solutions. Buyers wanting stereo imaging or sub-bass extension will not find it here.

Highlights

  • Clear two-way talkback intercom
  • PoE 802.3af removes need for local power
  • 103 dB output at one metre for wide coverage
  • 80 Hz to 15 kHz frequency range for clear speech
  • 75 in square lay-in tile fits standard ceiling grid

Specifications

BrandValcom
ModelVIP-422A
Frequency Response80 Hz to 15 kHz
Connectors10/100 Mbps Ethernet
Manual or Dynamic Host Configuration Protocol (DHCP) IP address assignment.
Time and date synchronization using NTP
Power SupplyPOWER REQUIREMENTS: Power over Ethernet (POE) 802.3af compatible
Dimensions & WeightDimensions:
23.75in L x 23.75in W x 3.75in D
(60.33cm) x (60.33cm) x(9.53cm)
Weight: 5.50lbs (2.49kg)
Shipping weight2.27 kg
Package size603 × 603 × 95 mm

Questions about this item

What comes in the box with the VIP-422A and what must I buy separately?

The VIP-422A includes the 2' x 2' ceiling speaker assembly with an 8-inch driver, integrated PoE electronics, and mounting hardware for lay-in tiles. You must provide a PoE-enabled network switch or midspan injector and standard Ethernet cabling; no local power supply is required.

The specs list Valcom, InformaCast® and Syn-Apps® versions — how do I choose the right one?

The VIP-422A hardware is the same across versions; the difference is the pre-loaded firmware. Choose the Valcom version for native Valcom systems, the InformaCast version for Singlewire InformaCast servers, or the Syn-Apps version for Syn-Apps Revolution platforms.

What does the 103 dB at 1 metre output level mean once the speaker is installed in a ceiling?

At one metre directly below the tile the speaker produces 103 dB SPL, which is loud enough for clear paging and emergency tones in typical open-plan offices, corridors or classrooms; actual coverage depends on ceiling height, tile absorption and ambient noise.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.