Valcom, Inc
Valcom, Inc V-1013B-WW 1W Track-Style Speaker White 70Hz 600 Ohm
A 1-watt track-style speaker in white with a 70 Hz frequency response and 600 ohm nominal impedance
- Frequency Response70 Hz
- Nominal Impedance600 Ohm
- ColorWhite
- 1-watt output for clear paging
- 70 Hz frequency response for speech clarity
- 600 Ohm impedance suits commercial audio lines
- White track-style design blends with ceilings
- New condition ready for installation
Purpose-built paging speaker
The Valcom V-1013B-WW is a 1-watt track-style speaker finished in white with a matching grille. It is designed for commercial paging and background-music systems that require a narrow-profile unit. The 600-ohm nominal impedance suits constant-voltage distributed-audio lines. Installers mounting it in standard track channels will find the form factor a direct fit.
Thermals, noise and power draw
The driver handles only one watt of continuous power, so heat dissipation is minimal and no active cooling is required. Passive operation means the unit adds no fan noise to the environment. Its low power draw places negligible load on the amplifier channel, leaving headroom for other zones on the same circuit.
Mounting hardware simplifies installation
The track-style chassis slides into compatible mounting rails without separate brackets or tools. A white grille is pre-fitted, preserving a clean ceiling appearance and eliminating the need to order a cosmetic accessory separately. The 70 Hz low-frequency limit and 600-ohm impedance are fixed characteristics; the bundle does not alter either specification.
Highlights
- 1-watt output for clear paging
- 70 Hz frequency response for speech clarity
- 600 Ohm impedance suits commercial audio lines
- White track-style design blends with ceilings
- New condition ready for installation
Specifications
| Brand | Valcom |
|---|---|
| Model | V-1013B-WW |
| Frequency Response | 70 Hz |
| Nominal Impedance | 600 Ohm |
| Color | White |
Questions about this item
How do I mount the V-1013B-WW track-style speaker and what wiring step is often missed?
Mount the speaker onto a compatible track using its built-in hardware, then connect the two leads to a 70 V line — the step often missed is setting the transformer tap to the 1 W position so the 600 Ohm load matches the amplifier.
What maintenance will the V-1013B-WW need after installation?
The sealed driver requires no routine service; only inspect the grille and wiring connections during periodic system checks and clean the white finish with a dry cloth if dust accumulates.
At what point does the V-1013B-WW reach its output limit during continuous paging?
The 1 W rating and 600 Ohm impedance mean the speaker will hit its thermal limit first if driven above 1 W for extended periods, so keep the amplifier level at or below the 1 W tap setting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



