We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Micro USB to Mini USB cable with straight connectors

V7

V7 F3-1866C10D-16GSR Micro USB to Mini USB cable

SKU CH-7465-FAH8A MPN F3-1866C10D-16GSR

A 16 GB dual-channel DDR3 1866 kit rated at 10-11-10-30 timings and 1.50 V for Intel LGA1155 and AMD platforms

  • Connector TypeMicro USB to Mini USB
  • Dual-channel DDR3 1866 MHz boosts bandwidth
  • CAS latency 10 reduces response delay
  • Timing 10-11-10-30 optimises stability
  • 50 V operation suits standard platforms
  • Intel XMP support enables profile overclocking

G.Skill Sniper 16 GB DDR3 kit

This G.Skill Sniper Gaming Series kit delivers 16 GB of DDR3 memory in a matched pair of 8 GB modules. Rated at 1866 MHz with timings of 10-11-10-30 and CAS latency 10, it operates at 1.50 V. The kit is designed for dual-channel desktop platforms.

Suited for LGA1155 and Llano/AM3+ builds

Builders upgrading Intel LGA1155 or AMD Llano and AM3+ systems will find the XMP profile support useful for straightforward overclocking. It is not for platforms that require a different memory generation or voltage. Buyers needing a single module or a capacity other than 16 GB should look elsewhere.

DDR3 1866 dual-channel specification

The decisive figure is the DDR3 1866 rating combined with the dual-channel 2 x 8 GB layout. This determines whether the kit matches the motherboard's supported speed, channel architecture and total capacity requirement.

Highlights

  • Dual-channel DDR3 1866 MHz boosts bandwidth
  • CAS latency 10 reduces response delay
  • Timing 10-11-10-30 optimises stability
  • 50 V operation suits standard platforms
  • Intel XMP support enables profile overclocking

Specifications

Connector TypeMicro USB to Mini USB

Questions about this item

Do I need a motherboard with DDR3 slots to install this 16 GB kit?

Yes, the kit uses DDR3 modules that require a motherboard with DDR3 DIMM slots and a compatible chipset.

Will the XMP profile apply automatically on an Intel LGA1155 board?

The modules support Intel XMP, so selecting the profile in the BIOS will set the rated 1866 MHz speed and 10-11-10-30 timings.

How can I verify the memory is running at the rated 1866 MHz with CAS 10 after installation?

Check the memory frequency and timings in the BIOS or with a system-information tool; they should show 1866 MHz and 10-11-10-30 at 1.50 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.