We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DDR3 memory kit four modules black heatspreaders

V7

V7 F3-12800CL9Q-16GBSR Lightning to USB C cable

SKU CH-PQD0-CQ9A2 MPN F3-12800CL9Q-16GBSR

16 GB DDR3 desktop memory kit running at 1600 MHz with 9-9-9-24 timings and 1.50 V voltage

  • Connector TypeLighting to USB C
  • 16 GB quad-channel kit eliminates bottlenecks
  • DDR3 1600 MHz CL9 timing ensures responsive performance
  • 50 V operation keeps power draw low
  • Intel XMP profile enables one-click overclocking
  • 240-pin desktop DIMMs fit standard motherboards

Quad-Channel DDR3 Kit

This 16 GB kit contains four 4 GB modules of DDR3 memory rated at 1600 MHz with timings of 9-9-9-24. It is built for desktop systems that support quad-channel operation and Intel XMP profiles, allowing straightforward configuration in the BIOS for improved responsiveness. The modules run at a standard 1.50 V.

Compatibility Focus

The kit targets enthusiasts using Intel LGA1155 or LGA1156 platforms, or AMD AM3, Llano, and AM3+ platforms that can leverage quad-channel bandwidth. Builders whose motherboards only support dual-channel memory or require a different voltage will not gain the intended benefit from this specific quad-channel configuration.

Decisive Specification

The 240-pin DDR3 form factor and 1.50 V operating voltage determine whether this kit fits your board. Verify that your motherboard accepts 240-pin DDR3 DIMMs at this voltage before purchasing, as newer platforms use physically and electrically different memory standards.

Highlights

  • 16 GB quad-channel kit eliminates bottlenecks
  • DDR3 1600 MHz CL9 timing ensures responsive performance
  • 50 V operation keeps power draw low
  • Intel XMP profile enables one-click overclocking
  • 240-pin desktop DIMMs fit standard motherboards

Specifications

Connector TypeLighting to USB C

Questions about this item

Will the 240-pin DDR3 modules fit my motherboard slots?

Yes, the kit uses standard 240-pin DDR3 DIMMs that install in any desktop board with DDR3 slots.

How do I enable the rated 1600 speed instead of the default JEDEC speed?

Enter the BIOS and select the Intel XMP profile; the modules will then run at DDR3 1600 with 9-9-9-24 timings at 1.50 V.

What voltage should I set if I configure the timings manually?

Set the DRAM voltage to 1.50 V to match the kit's rated specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.