V4ink
V4ink TN880 toner cartridge 12000 pages
High-yield black toner cartridge prints up to 12000 pages and fits Brother HL-L6200DW, HL-L6300DW and MFC-L6800DW models
- Compatible ProductsFor Brother HL-L6200DW HL-L6200DWT Printer For Brother HL-L6
- Up to 12,000 pages per cartridge at 5% coverage
- Works with HL-L6200DW HL-L6300DW HL-L6400DW MFC series printers
- New chip enables accurate toner level monitoring
- ISO 9001 compatible manufacturing quality
- 100% brand new non-OEM cartridge ready to install
What this cartridge replaces
This compatible toner replaces the Brother TN880 high-yield black cartridge and fits the HL-L6200DW HL-L6200DWT HL-L6250DW HL-L6300DW HL-L6400DW HL-L6400DWT MFC-L6700DW MFC-L6750DW MFC-L6800DW MFC-L6900DW and M428fdn printers. It ships new with a chip installed so the printer recognises it immediately and shows remaining toner levels. Small offices and home users who print thousands of pages a month will find the 12000-page yield at 5 % coverage a direct match for the original specification.
Thermal behaviour and power use
Because toner is fused by heat rather than liquid ink the printer’s fuser unit determines temperature and power draw not the cartridge itself. The compatible formulation meets the same melt-point range as the OEM supply so warm-up time and steady-state power consumption remain unchanged. No additional fan noise or cooling demand is introduced by using this cartridge in any of the listed models.
Sustained output over the full yield
The chip tracks page count accurately from the first sheet to the 12000-page rating so the printer will not stop prematurely or report false empty warnings. Density and sharpness stay consistent across long print runs because the toner particle size distribution is controlled to the same ISO 9001 process limits used for the original cartridge. Users who regularly print multi-hundred-page batches will see no fade or streaking before the rated life ends.
Highlights
- Up to 12,000 pages per cartridge at 5% coverage
- Works with HL-L6200DW HL-L6300DW HL-L6400DW MFC series printers
- New chip enables accurate toner level monitoring
- ISO 9001 compatible manufacturing quality
- 100% brand new non-OEM cartridge ready to install
Specifications
| Brand | Compatible for Brother TN880 TN-880 |
|---|---|
| Compatible Products | For Brother HL-L6200DW HL-L6200DWT Printer For Brother HL-L6250DW HL-L6300DW M428fdn Printer For Brother HL-L6400DW HL-L6400DWT Printer For Brother Brother MFC-L6800DW MFC-L6900DW Printer For Brother MFC-L6700DW MFC-L6750DW Printer |
Questions about this item
How do I install the TN880 cartridge in my HL-L6200DW and what step do people often miss?
Open the front cover, remove the old cartridge, shake the new TN880 gently side-to-side, pull the orange seal straight out, insert until it clicks, then close the cover; the step most people miss is removing the full-length seal before insertion.
What maintenance or replacement will this cartridge need later?
The TN880 is a single-unit toner cartridge; when print quality fades or the printer reports low toner after roughly 12000 pages at 5% coverage, replace the whole cartridge — no separate drum or developer unit is required for this model.
What limit shows up first under sustained heavy printing with this cartridge?
The page-yield rating of 12000 pages at 5% coverage is the first limit; continuous high-coverage printing will reach that threshold sooner and trigger the low-toner chip signal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



