V4ink
V4ink CF280A 80A Black Toner Cartridge 2-Pack 2,700 Pages
Two-pack black laser toner delivering 2,700 pages per cartridge for HP LaserJet Pro 400 M401 and M425 series printers
- 2,700 pages per cartridge at 5% coverage
- Two-pack keeps a spare ready for high-volume printing
- Chip installed for direct printer recognition
- Works with LaserJet Pro 400 M401 and MFP M425 series
- New aftermarket toner delivers sharp black output
V4ink CF280A 80A Two-Pack
This two-pack supplies two new black toner cartridges built for HP LaserJet Pro 400 M401 and M425 printers. It suits offices and home users who print regularly and want a spare cartridge on hand. Each unit is an aftermarket replacement designed to fit the listed models without modification. The pack simplifies reordering for consistent monochrome output.
Thermals Noise and Power
Toner cartridges are passive consumables that generate no heat, noise or electrical draw of their own. The laser printer handles all thermal and power management during printing. No additional cooling or power considerations apply to the cartridges themselves. They sit idle until the printer engages the developer roller and fuser.
2,700-Page Yield at 5% Coverage
Each cartridge delivers approximately 2,700 pages measured at five percent page coverage. Actual yield varies with content density, page size and environmental conditions. Buyers who need higher capacity or colour output should consider other supplies. This yield figure is the primary metric for planning replacement intervals.
Highlights
- 2,700 pages per cartridge at 5% coverage
- Two-pack keeps a spare ready for high-volume printing
- Chip installed for direct printer recognition
- Works with LaserJet Pro 400 M401 and MFP M425 series
- New aftermarket toner delivers sharp black output
Specifications
| Brand | CF280A |
|---|
Questions about this item
How do I install the CF280A cartridge in a LaserJet Pro M401dn, and what step is often missed?
Open the front cover, pull the old cartridge straight out, remove the orange sealing tape completely from the new unit, then slide it in until it clicks; the step most skipped is pulling the full length of tape before insertion.
What will need replacement after the 2,700-page yield is reached on each black cartridge?
The entire toner cartridge is replaced once the 2,700 pages at 5% coverage are printed; there is no separate drum or developer unit to service on this model.
What print-quality limit appears first during long, continuous jobs with the 80A toner?
Extended runs can cause the cartridge to overheat, leading to faint streaks or uneven density before the rated 2,700 pages are reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



