V2 Technologies
V2 Technologies TPM 2.0 Module 10Pin SPI AOM TPM 9672V 2 in 1 accessory
Adds TPM 2.0 hardware encryption to SuperMicro motherboards with a 10‑pin SPI connector
- TPM 2.0 security for SuperMicro AOM TPM 9672 motherboards
- 10-pin SPI connector matches the board header exactly
- Hardware encryption protects keys, passwords and data channels
- Firmware-updatable design keeps protection current against new threats
- Simple plug-in install after power-off and clearance check
Purpose-built security module
The V2 Technologies TPM 2.0 module adds hardware-based encryption to SuperMicro motherboards equipped with a 10-pin SPI header. It targets system builders and administrators who need platform-level key storage and attestation without relying on firmware-only solutions.
Vertical 10-pin SPI mounting
The module plugs directly into the AOM TPM 9672 header on compatible boards, sitting vertically to conserve board space. Installation requires cutting power, aligning the keyed connector, and disabling conflicting security features in the BIOS before first boot.
Passive operation and low draw
With no active cooling or moving parts the module runs silently and draws negligible power from the SPI bus. Normal use adds no audible noise or measurable thermal load, leaving system acoustics and power budgets unchanged.
Highlights
- TPM 2.0 security for SuperMicro AOM TPM 9672 motherboards
- 10-pin SPI connector matches the board header exactly
- Hardware encryption protects keys, passwords and data channels
- Firmware-updatable design keeps protection current against new threats
- Simple plug-in install after power-off and clearance check
Specifications
No published specifications for this item yet.
Questions about this item
Does the 10-pin SPI interface limit TPM 2.0 performance?
The 10-pin SPI connection carries the TPM 2.0 specification; bandwidth is defined by the motherboard implementation, not the module itself.
What physical clearance does the vertical 10-pin module need on a SuperMicro board?
The module plugs straight into the AOM TPM 9672V header; verify that adjacent components or a chassis wall do not block the vertical profile before fitting.
Which BIOS step is commonly missed when installing this TPM 2.0 module?
After inserting the module with power off, you must enter BIOS, disable any competing security features, then explicitly enable the TPM 2.0 device so the OS can recognise it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



