We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten short multicoloured mono patch cables 3.5 mm to 6.35 mm TS connectors

V2 Technologies

V2 Technologies Mono Patch Cables TS 3.5mm to 6.35mm 10-Pack 15 cm

SKU CH-S60W-P3RR2

Ten mono patch cables connect 3.5 mm to 6.35 mm jacks at 15 cm length for Eurorack and modular synthesiser patching

  • 10 cables keep Eurorack signals organised with colour coding
  • 15 cm length fits tight patch bays without excess slack
  • 5 mm to 6.35 mm TS plugs connect modules to larger gear directly
  • 26 AWG oxygen-free copper preserves signal purity over every patch
  • Nickel-plated connectors resist corrosion for long-term studio reliability

Ten-pack mono patch cables

This ten-pack supplies mono patch cables with a 3.5 mm TS plug on one end and a 6.35 mm TS plug on the other. They are built for Eurorack modular synthesisers and general patching duties where a mono 3.5 mm to 6.35 mm connection is required. Each cable measures 15 cm in length. The set uses colour coding to help organise CV, gate and audio signals.

Fully moulded 26 AWG construction

Each cable uses 26 AWG stranded copper wire rated at 99.99 % purity and oxygen-free. Nickel-plated connectors provide high corrosion protection while the fully moulded plastic housings add durability. Flexible strain relief at both ends reduces stress on the solder joints during frequent repatching. Straight male jacks keep the profile compact in dense Eurorack rows.

Short length limits reach between modules

At 15 cm the cables suit tight intracase routing but cannot span larger cabinets or connect separate cases without slack. The mono TS interface carries unbalanced signals only, so balanced line-level gear requires different leads. Users needing longer runs should choose 30 cm, 60 cm or 120 cm variants from the same series.

Highlights

  • 10 cables keep Eurorack signals organised with colour coding
  • 15 cm length fits tight patch bays without excess slack
  • 5 mm to 6.35 mm TS plugs connect modules to larger gear directly
  • 26 AWG oxygen-free copper preserves signal purity over every patch
  • Nickel-plated connectors resist corrosion for long-term studio reliability

Specifications

No published specifications for this item yet.

Questions about this item

Does the TS 3.5 mm to 6.35 mm mono patch cable carry balanced or unbalanced signals?

Both connectors are analog mono unbalanced straight jacks, so the cable passes an unbalanced signal between 3.5 mm and 6.35 mm ports.

What physical clearance do the straight moulded plugs need behind a Eurorack panel?

Each straight TS plug extends directly from the jack; allow enough depth for the moulded body and the 15 cm cable bend radius in a tight rack.

How are the cables installed and what common mistake should be avoided?

Push each TS plug firmly until seated; the error is confusing the mono TS plugs with TRS jacks, which would leave the ring contact floating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.