V2 Technologies
V2 Technologies Long Arm TV Mount with Power Strip 31.5in 37-75in 100lb 2 in 1 accessory
Full-motion TV wall mount with 31.5 in extension and built-in surge-protected power strip for 37–75 in screens up to 100 lb
- Mount 37-75 inch TVs up to 100 lbs with VESA 200x100 to 600x400mm
- Integrated power strip with 3 AC outlets plus USB-A and USB-C ports
- Surge protection guards devices from spikes and lightning strikes
- 5 inch arm extends for corner viewing and retracts to 2.8 inches
- Single-stud installation on wood, concrete or brick walls
V2 Technologies Long Arm TV Mount with Power Strip
This 2-in-1 accessory combines a full-motion TV bracket with an integrated surge-protector power strip. It supports flat or curved screens from 37 to 75 inches weighing up to 100 lbs. VESA patterns from 200x100 mm to 600x400 mm are covered. The unit suits living rooms, bedrooms, kitchens and meeting rooms where a single mount handles both display positioning and device charging.
Installation requirements and common issues
The mount attaches to a single wood stud, solid concrete or brick walls; drywall alone is not sufficient. A 31.5 inch arm extends for corner placement and retracts to 2.8 inches from the wall. The built-in strip provides three AC outlets, one USB-A and one USB-C port, keeping cables tidy during swivel and tilt movements. Installers must verify stud location and wall type before drilling to avoid a loose fit.
Maximum VESA 600x400 mm and 100 lb capacity
The decisive specification is the VESA 600x400 mm upper limit combined with the 100 lb load rating. Screens exceeding either dimension or weight cannot be mounted safely. Buyers with larger VESA patterns or heavier displays need a different bracket. The integrated power strip does not change the mechanical limits of the arm.
Highlights
- Mount 37-75 inch TVs up to 100 lbs with VESA 200x100 to 600x400mm
- Integrated power strip with 3 AC outlets plus USB-A and USB-C ports
- Surge protection guards devices from spikes and lightning strikes
- 5 inch arm extends for corner viewing and retracts to 2.8 inches
- Single-stud installation on wood, concrete or brick walls
Specifications
No published specifications for this item yet.
Questions about this item
How do I confirm the 31.5in arm moves smoothly after mounting it on a single wood stud?
Extend the arm to its full 31.5in reach, then retract it to the 2.8in folded position; the integrated cable routing should stay tidy and the TV should swivel freely between zones without binding.
What hardware and cables come in the box versus what I must source separately?
The mount, integrated power strip with three AC outlets, one USB-A and one USB-C port, and mounting hardware for wood stud, concrete and brick are included; you supply the TV and any HDMI or power cords for your devices.
Which VESA pattern from the 200x100 to 600x400mm range matches my TV?
Check the back of your TV for the four mounting-hole dimensions; any pattern between 200x100mm and 600x400mm will fit, so choose the one that matches your TV’s VESA specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



