We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular projector lamp module with silver housing and clear glass bulb

V2 Technologies

V2 Technologies Litance Replacement Projector Lamp Bulb for Epson ELPLP96 2 in 1 accessory

SKU CH-5QVZ-AEWYC

A replacement projector lamp assembly with a 230/200W bulb matching original specifications for compatible Epson models

  • Bright, vivid images from a 230/200W bulb engineered to match Epson specifications
  • Ready-to-install lamp assembly eliminates separate housing handling
  • Direct replacement for ELPLP96 / V13H010L96 across many Epson projectors
  • Supports Home Cinema 1060, 2100, 2150 and PowerLite 107, 108, 109W models
  • Compatible with EX3260, EX5260, VS250, VS350, VS355 and EB-S39, S41+, W42+ series

Replacement Lamp for Epson Projectors

This V2 Technologies Litance assembly supplies a direct replacement lamp for a wide range of Epson projectors. It is built to match the original manufacturer specifications for reliable operation. The unit arrives new and ready to install in compatible models.

For owners of listed Epson models

The lamp fits the VS series, EX series, Home Cinema, PowerLite and EB series models detailed in the compatibility list. It is not suitable for projectors from other brands or Epson models that use a different lamp code. Buyers with unlisted units should verify the part number before ordering.

230/200W ELPLP96 lamp specification

The assembly uses a 230/200W bulb coded ELPLP96 or V13H010L96 that determines fit and brightness. Matching this exact part number to the projector's service manual is the single check that confirms compatibility. No other specification governs whether this lamp will work.

Highlights

  • Bright, vivid images from a 230/200W bulb engineered to match Epson specifications
  • Ready-to-install lamp assembly eliminates separate housing handling
  • Direct replacement for ELPLP96 / V13H010L96 across many Epson projectors
  • Supports Home Cinema 1060, 2100, 2150 and PowerLite 107, 108, 109W models
  • Compatible with EX3260, EX5260, VS250, VS350, VS355 and EB-S39, S41+, W42+ series

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the ELPLP96 lamp assembly in my Epson projector?

Power off and unplug the projector, wait for it to cool, open the lamp cover with a screwdriver, release the retaining screws, pull the old module out by its handle, insert the new V13H010L96 unit until it seats firmly, tighten the screws, close the cover, then reset the lamp timer in the menu.

What maintenance will the 230/200W bulb need over time?

The lamp is a consumable rated for typical projector hours; when brightness drops or the replacement warning appears, purchase a new ELPLP96 assembly and swap it using the same procedure.

What limit appears first during long sessions with this 230/200W bulb?

Heat buildup triggers the projector's thermal protection, which dims or shuts down the lamp before the rated hours are reached, so keep vents clear and filters clean.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.