V2 Technologies
V2 Technologies 920B Remtronix Scanner Antenna BNC 400-480/700-900MHz 9" Whip 2 in 1 accessory
A BNC whip antenna covering 400-480 and 700-900 MHz adds 6 dB gain over stock units for compatible Uniden and Whistler police scanners
- Boosts scanner reception 25-100% with 6+dB gain over stock antennas
- Covers 400-480 MHz and 700-900 MHz UHF digital, analog and trunked bands
- Nine-inch flexible whip manoeuvres easily in tight spaces
- BNC connector fits Uniden SR30C, BCD325P2, BC125AT, BC75XLT and Whistler TRX-1, WS1040
- Designed exclusively for police scanner radios, not for general two-way use
Police Scanner Antenna 920B
The V2 Technologies 920B Remtronix antenna connects to compatible Uniden and Whistler police scanners via a BNC end type. It covers 400-480 MHz and 700-900 MHz UHF digital, analog and trunked frequencies. The 9-inch flexible whip is designed for handheld scanner radios only.
Reception Gain Under Continuous Monitoring
The antenna delivers 6+dB gain over stock handheld antennas from Whistler and Uniden. This boost translates to a 25-100% reception increase during extended scanning sessions across both UHF bands. Performance holds steady while monitoring digital, analog and trunked systems without signal drop-off.
Physical Design for Handheld Use
The flexible whip construction withstands repeated bending during daily carry and vehicle mounting. No external power is required, so the antenna adds zero draw to the scanner battery. The BNC connector seats firmly to maintain contact through vibration and movement.
Highlights
- Boosts scanner reception 25-100% with 6+dB gain over stock antennas
- Covers 400-480 MHz and 700-900 MHz UHF digital, analog and trunked bands
- Nine-inch flexible whip manoeuvres easily in tight spaces
- BNC connector fits Uniden SR30C, BCD325P2, BC125AT, BC75XLT and Whistler TRX-1, WS1040
- Designed exclusively for police scanner radios, not for general two-way use
Specifications
No published specifications for this item yet.
Questions about this item
How much power does the 9" flexible whip draw when the scanner runs all day?
The antenna is a passive component and draws no power from the scanner during continuous operation.
Which scanner models must I already own for the BNC connector to fit?
Compatible models include Uniden SR30C, BCD325P2, BC125AT, BC75XLT and Whistler TRX-1, WS1040; it does not fit the Uniden SDS100.
Will the 400-480 MHz and 700-900 MHz ranges work with my older Uniden BC75XLT?
Yes, the BC75XLT is listed as compatible and the antenna covers both UHF bands used by that scanner.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
