V2 Technologies
V2 Technologies 2 in 1 accessory for Nissan Rogue 2012-2015
Replaces the rear park-assist camera on Nissan Rogue 2012-2013 and Rogue Select 2014-2015 with a 800TVL IP69K unit covering 206° diagonal view
- Clear reversing view with 800 TVL resolution
- Wide 206° diagonal detection angle covers blind spots
- IP69K rated for water and dust resistance
- Operates reliably from -40 to 105 °C
- Direct replacement for Nissan part 284421VX1A
Vehicle Fitment and Purpose
This rear-view backup camera fits Nissan Rogue models from 2012 to 2013 and Rogue Select models from 2014 to 2015 equipped with a Type 2 system. It serves as a direct replacement for the factory park-assist camera, restoring the driver's rearward visibility when reversing.
Upgrade Considerations
The unit replaces a damaged or failed original camera carrying reference numbers such as 284421VX1A or 592010. The jump is worth it when the existing lens is cracked, the image has degraded, or water ingress has disabled the sensor, because the new housing restores the full 206-degree diagonal viewing angle.
Sustained Environmental Performance
Built to IP69K waterproof standards, the camera operates continuously across a temperature span of -40 to 105 and meets FMVSS 111 regulatory requirements. It maintains 800 TVL clarity in low light down to 0.1 lux, so the picture stays usable during extended night driving or heavy weather rather than fading after a short warm-up.
Highlights
- Clear reversing view with 800 TVL resolution
- Wide 206° diagonal detection angle covers blind spots
- IP69K rated for water and dust resistance
- Operates reliably from -40 to 105 °C
- Direct replacement for Nissan part 284421VX1A
Specifications
No published specifications for this item yet.
Questions about this item
What vehicle opening does the 206-degree diagonal camera fit?
The camera replaces the factory rear-view unit on Nissan Rogue 2012-2013 Type 2 and Rogue Select 2014-2015 Type 2 models using the original mounting points.
Which wiring harness connects to the 800TVL sensor?
Plug the supplied connector into the vehicle's park-assist harness; the keyed plug prevents reverse polarity, which is the most common install error.
When should the IP69K-sealed lens be cleaned or replaced?
Clean the lens whenever debris reduces the 193.8-degree horizontal view; replace the unit if water ingress appears or image clarity drops below 800TVL.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



