We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal network switch with 18 RJ45 ports and two uplink ports

V2 Technologies

V2 Technologies 2 in 1 accessory

SKU CH-ANC9-RHRCH

An 18-port unmanaged Gigabit PoE switch with 16 powered ports delivering up to 30 W each and a 250 W total budget, plus two uplink ports and one-key VLAN isolation

  • 16 PoE ports deliver power and data over one cable
  • 250 W total PoE budget supports up to 30 W per port
  • Two gigabit uplink ports handle high-speed backbone traffic
  • One-Key VLAN isolates ports 1-16 from each other for security
  • Plug-and-play unmanaged design requires no configuration

18-Port Gigabit PoE Switch

This 18-port Gigabit switch provides 16 PoE ports compliant with 802.3 af/at standards and two dedicated uplink ports. Each PoE port delivers up to 30 W for a total power budget of 250 W. The unmanaged design requires no configuration, and a metal chassis with industrial-grade fans ensures stable, quiet operation. It supports desktop, wall-mount or rackmount installation.

Suited for IP camera or access point deployments

The switch suits installers who need to power up to 16 PoE devices such as IP cameras or wireless access points from a single unit. The One-Key VLAN mode isolates ports 1 to 16 from each other while allowing communication with uplink ports 17 and 18, which helps contain broadcast storms. Buyers who require managed features such as SNMP, link aggregation or per-port power scheduling should look at a managed switch instead.

Check power budget and cabling before ordering

Verify that the combined draw of all connected PoE devices stays within the 250 W limit. Ensure each device uses Cat 5e or better cabling to reach 1000 Mbps speeds at the required distance. Confirm you have a nearby mains outlet for the internal power supply and enough physical space for the chosen mounting method.

Highlights

  • 16 PoE ports deliver power and data over one cable
  • 250 W total PoE budget supports up to 30 W per port
  • Two gigabit uplink ports handle high-speed backbone traffic
  • One-Key VLAN isolates ports 1-16 from each other for security
  • Plug-and-play unmanaged design requires no configuration

Specifications

No published specifications for this item yet.

Questions about this item

What PoE standard must my cameras or access points support to draw power from the 16 RJ45 ports on this AUMOX PRO SG518P?

The 16 PoE ports comply with 802.3af and 802.3at, delivering up to 30W per port and a 250W total budget for all powered devices.

Can I keep my existing 100 Mbps IP cameras and still use the 1 Gbps uplink ports 17 and 18 on this switch?

Yes, each of the 16 PoE ports auto-negotiates at 10/100/1000 Mbps, so legacy 100 Mbps devices connect normally while uplinks run at full gigabit speed.

Which front-panel LEDs confirm that ports 1 through 16 are both linked and delivering PoE power after I plug in my devices?

Each RJ45 port shows a link/activity LED; when a powered device is detected the corresponding PoE indicator lights, confirming data and power on that port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.