We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three stepped cylindrical pieces 20mm 24.9mm 43.15mm

V-Project Inc

V-Project Inc Wheel Studs Installer Tools Nut Kit m12x1.25 20mm x 24.9mm x 43.15mm

SKU CH-BPKN-EKGVM

Installs M12×1.25 wheel studs on Subaru Legacy and many Nissan and Infiniti models

  • Colorchrome
  • Commercial/ResidentialResidential
  • Fits Subaru Legacy and many other models
  • Thread size M12 x 1.25 matches factory specification
  • Chrome finish resists corrosion during installation
  • Designed for pin-type wheel studs
  • Three-piece kit covers 20 mm, 24.9 mm and 43.15 mm lengths

Wheel Stud Installer Kit M12x1.25

This kit provides the tools needed to install wheel studs on a wide range of vehicles. It covers Subaru Legacy models alongside many Infiniti and Nissan applications. The thread size is M12 x 1.25.

Suitability And Limitations

The kit suits owners of listed vehicles who need to replace pin-type studs using the supplied hardware. It does not suit vehicles with a different thread pitch or stud type. Buyers who want more coverage for unlisted makes should look at something else.

Critical Dimension Check

The stud length measures 20mm, 24.9mm and 43.15mm, corresponding to 0.787 inch, 0.980 inch and 1.698 inch. Verify these exact lengths against the original hardware before fitting.

Highlights

  • Fits Subaru Legacy and many other models
  • Thread size M12 x 1.25 matches factory specification
  • Chrome finish resists corrosion during installation
  • Designed for pin-type wheel studs
  • Three-piece kit covers 20 mm, 24.9 mm and 43.15 mm lengths

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

What thread size must the vehicle's hubs have for this M12 x 1.25 kit to fit?

The kit uses M12 x 1.25 threads, so the hubs must accept that exact pitch and diameter for the studs to install correctly.

Will these installer nuts work with the existing lug nuts on a Subaru Legacy?

The nuts in this kit are for installing pin-type studs only; your existing lug nuts remain on the wheel and are not replaced by this tool set.

How can I confirm the studs are fully seated after using the 43.15 mm installer?

When the installer nut bottoms out against the hub face, the 20 mm stud shoulder should sit flush with no visible gap, indicating correct depth.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.