We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer nut kit m12x1.25

V-Project Inc

V-Project Inc Wheel Studs Installer Tools Nut Kit m12x1.25

SKU CH-473D-8JWKE

Wheel stud installer kit fits Nissan 300ZX and many other models with M12×1.25 thread

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Nissan 300ZX with m12 x 1.25 thread
  • Pin-stud installer kit speeds wheel-stud replacement
  • Three-piece set covers 20 mm, 24.9 mm and 43.15 mm lengths
  • Chrome finish resists corrosion during residential use
  • Fits extensive Nissan, Infiniti and Subaru model ranges

Nissan 300ZX Wheel Stud Installer

The V-Project Inc kit is designed for Nissan 300ZX models and fits a wide range of Infiniti, Nissan and Subaru vehicles. It provides the hardware needed to install pin-type wheel studs with an M12 x 1.25 thread. The kit suits DIY mechanics and professional workshops performing hub maintenance.

Chrome Finish and Thread Specifications

The components feature a chrome finish and are manufactured to M12 x 1.25 thread dimensions. Critical measurements include 20 mm, 24.9 mm and 43.15 mm lengths, with inch equivalents of .787, .980 and 1.698 inches. These dimensions ensure correct engagement with the hub and lug nuts.

Residential Use and Vehicle Compatibility

The kit is rated for residential use and covers applications across numerous Infiniti models such as the G35, Q50 and QX60, plus Nissan models including 350Z, GT-R and Titan. Subaru coverage spans Impreza, WRX, Forester and BRZ among others. Builders needing different thread pitches or stud types must source a separate kit.

Highlights

  • Designed for Nissan 300ZX with m12 x 1.25 thread
  • Pin-stud installer kit speeds wheel-stud replacement
  • Three-piece set covers 20 mm, 24.9 mm and 43.15 mm lengths
  • Chrome finish resists corrosion during residential use
  • Fits extensive Nissan, Infiniti and Subaru model ranges

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I install the m12x1.25 wheel studs using this kit without damaging the threads?

Thread the installer nut onto the new stud by hand, then tighten with a socket until the stud seats fully against the hub flange; the 20 mm, 24.9 mm and 43.15 mm stepped lengths guide alignment.

What maintenance will the chrome-finished installer nut and threads need over time?

Wipe the chrome surfaces clean after each use and apply a light anti-seize coating to the m12 x 1.25 threads to prevent galling during future installations.

At what point does the 1.25 mm thread pitch become the limiting factor during repeated stud changes?

The fine 1.25 mm pitch yields lower stripping torque than coarse threads, so the installer nut threads will show wear first if overtightened on successive jobs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.