We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three stepped sockets in m12x1.25 thread size

V-Project Inc

V-Project Inc Wheel Studs Installer Tools Nut Kit For Nissan Platina m12x1.25

SKU CH-5Y1X-Z3MJ5

Wheel stud installer nut kit with M12×1.25 thread for Nissan, Infiniti and Subaru models

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Nissan Platina with m12 x 1.25 thread
  • Chrome finish resists corrosion for residential wheel work
  • 20 mm x 24.9 mm x 43.15 mm dimensions fit pin-stud installation
  • Compatible with multiple Infiniti, Nissan and Subaru models
  • .787 in x .980 in x 1.698 in sizing for precise fit

Threaded wheel-stud installer kit

This kit provides the hardware and driver tools needed to press new M12×1.25 pin-type studs into Nissan Platina hubs. The chrome-finished components resist corrosion during installation and service life. It is intended for residential garage use rather than commercial shop throughput.

Fits Nissan and Infiniti hubs using M12×1.25 pin

Owners of listed Nissan models from Altima to Titan and Infiniti models from G20 to QX80 can replace damaged or stretched studs with this set. Builders working on vehicles that use a different thread pitch or a spline-type stud must source a matching kit instead.

M12×1.25 thread size with 20 mm 24.9 mm 43.15 mm

The studs measure 20 mm by 24.9 mm by 43.15 mm overall, matching the factory pin-stud profile for the specified applications. Verifying this exact thread size and length against the hub before purchase confirms the correct fit.

Highlights

  • Designed for Nissan Platina with m12 x 1.25 thread
  • Chrome finish resists corrosion for residential wheel work
  • 20 mm x 24.9 mm x 43.15 mm dimensions fit pin-stud installation
  • Compatible with multiple Infiniti, Nissan and Subaru models
  • .787 in x .980 in x 1.698 in sizing for precise fit

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

Will the 20 mm, 24.9 mm and 43.15 mm dimensions clear my wheel hub?

The studs measure 20 mm, 24.9 mm and 43.15 mm overall; verify your hub pocket depth and wheel centre bore before fitting.

What is the correct torque sequence for the M12 x 1.25 threads?

Thread each stud by hand, then torque to the vehicle manufacturer's specification in a star pattern; over-torquing stretches the M12 x 1.25 threads.

When should I inspect the chrome finish for corrosion?

Check the chrome surface at every tyre rotation or brake service; replace any stud showing pitting or thread damage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.