We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer nut kit, three cylindrical pieces with threaded ends

V-Project Inc

V-Project Inc Wheel Studs Installer Nut Kit m12x1.25 20mm 24.9mm 43.15mm chrome

SKU CH-KGF4-FJ0ZJ

Wheel stud installer kit with M12×1.25 thread and 20 mm, 24.9 mm, 43.15 mm dimensions for Nissan and Infiniti vehicles

  • Colorchrome
  • Commercial/ResidentialResidential
  • Fits Nissan, Infiniti and Subaru models
  • M12 x 1.25 thread matches factory studs
  • Three sleeve lengths cover 20 mm, 24.9 mm and 43.15 mm
  • Chrome finish resists corrosion during use
  • Designed for pin-type wheel stud installation

V-Project wheel stud installer kit

This kit provides the nuts and spacers needed to press new pin-type studs into hubs on a wide range of Nissan, Infiniti and Subaru models. It targets DIY owners and professional technicians who replace broken or stripped wheel studs without removing the hub assembly.

Chrome finish with m12 x 1.25 thread

The components are chrome plated for corrosion resistance and feature an m12 x 1.25 thread pitch matched to the listed vehicles. The set includes three stepped lengths of 20mm, 24.9mm and 43.15mm to accommodate different hub thicknesses and stud protrusion requirements.

Hand-tool operation with no power needed

Installation relies on standard lug wrenches or impact sockets to draw the stud into the hub using the supplied hardware. No hydraulic press or external power source is required, keeping noise and effort low during typical driveway or workshop use.

Highlights

  • Fits Nissan, Infiniti and Subaru models
  • M12 x 1.25 thread matches factory studs
  • Three sleeve lengths cover 20 mm, 24.9 mm and 43.15 mm
  • Chrome finish resists corrosion during use
  • Designed for pin-type wheel stud installation

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

What thread size does the m12x1.25 installer nut kit use for wheel studs?

The kit uses an m12 x 1.25 thread size, matching the factory specification for the listed Nissan, Infiniti and Subaru models.

What are the three critical lengths of the installer nuts in millimetres?

The three lengths are 20 mm, 24.9 mm and 43.15 mm, covering the range needed to seat different pin-type studs.

How do you install the nuts without cross-threading the new studs?

Thread each nut by hand until it seats fully, then tighten with a socket; forcing it with an impact gun before the threads engage is the common mistake.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.