We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-finish wheel stud installer nut kit for Subaru Deluxe m12x1.25

V-Project Inc

V-Project Inc Wheel Stud Installer Nut Kit Subaru Deluxe m12x1.25

SKU CH-3V6N-E8CGN

Installs M12 x 1.25 wheel studs on Subaru Deluxe and other models with chrome-finished components

  • Colorchrome
  • Commercial/ResidentialResidential
  • Fits Subaru Deluxe and many Nissan/Infiniti models
  • m12 x 1.25 thread matches factory wheel studs
  • 20 mm, 24.9 mm and 43.15 mm lengths cover common stud sizes
  • Chrome finish resists corrosion during installation
  • Designed specifically for pin-type wheel studs

Application scope

This wheel stud installer nut kit fits a wide range of Infiniti, Nissan and Subaru models including the Subaru Deluxe. The M12 x 1.25 thread size matches factory specifications for pin-type studs across the listed vehicles. Chrome finish provides corrosion resistance for residential garage use.

Thread constraint

The kit only works with M12 x 1.25 pin studs, so vehicles using different thread pitches or press-in stud designs cannot use these tools. Installers must verify the exact thread specification before beginning work to avoid damaging the hub or studs.

Critical specification

The M12 x 1.25 thread size is the single specification that determines whether this kit matches the vehicle. If the hub requires a different thread pitch or diameter, the nuts will not engage correctly and the studs cannot be installed safely.

Highlights

  • Fits Subaru Deluxe and many Nissan/Infiniti models
  • m12 x 1.25 thread matches factory wheel studs
  • 20 mm, 24.9 mm and 43.15 mm lengths cover common stud sizes
  • Chrome finish resists corrosion during installation
  • Designed specifically for pin-type wheel studs

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

What thread size should I select for my Subaru Deluxe wheel studs?

The kit uses an M12 x 1.25 thread, which matches the factory specification for Subaru Deluxe models listed in the application guide.

How do the 20 mm, 24.9 mm and 43.15 mm dimensions affect fitment on the car?

Those three lengths correspond to the stepped sections of the installer nut, allowing it to engage the pin-type stud correctly without bottoming out.

Does the M12 x 1.25 thread limit the torque I can apply during installation?

The thread pitch determines the clamping force per turn; follow the vehicle service manual torque value for M12 x 1.25 fasteners to avoid over-stressing the studs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.