We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel-stud installer nut kit, three cylindrical pieces in graduated lengths

V-Project Inc

V-Project Inc Wheel Stud Installer Nut Kit Subaru BRZ m12x1.25 20mm 24.9mm 43.15mm Chrome

SKU CH-QN3N-2D7D1

Chrome wheel-stud installer nut kit with M12×1.25 thread, 20 mm, 24.9 mm and 43.15 mm lengths for Subaru BRZ and compatible Nissan and Infiniti models

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Subaru BRZ wheel studs
  • m12 x 1.25 thread matches factory specification
  • Three precise lengths: 20mm, 24.9mm, 43.15mm
  • Chrome finish resists corrosion during installation
  • Pin-stud compatible for secure fit

Wheel Stud Installer Kit for Subaru BRZ

This kit provides the hardware needed to install wheel studs on a Subaru BRZ. It uses an M12 x 1.25 thread pitch and is finished in chrome. The set is designed for residential use on pin-type studs.

Build Quality and Daily Fit

Components measure 20mm, 24.9mm and 43.15mm in length for precise engagement. The chrome coating resists corrosion during repeated installation and removal cycles. Dimensions in inches are 0.787, 0.980 and 1.698 for reference.

Thread Standard Limitations

The M12 x 1.25 specification limits compatibility to hubs cut for that exact pitch. Vehicles requiring a different thread size or seat type cannot use this kit. Always verify the hub specification before fitting.

Highlights

  • Designed for Subaru BRZ wheel studs
  • m12 x 1.25 thread matches factory specification
  • Three precise lengths: 20mm, 24.9mm, 43.15mm
  • Chrome finish resists corrosion during installation
  • Pin-stud compatible for secure fit

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

What thread size does the M12×1.25 kit use for Subaru BRZ wheel studs?

The kit uses M12×1.25 threads, matching the factory stud pitch on the BRZ and listed Nissan and Infiniti models.

What are the three critical dimensions of the installer nuts in millimetres?

The nuts measure 20 mm, 24.9 mm and 43.15 mm in length to suit the pin-type studs on the BRZ.

How do you use the chrome installer nuts to press in new pin studs without damaging the hub?

Thread the nut onto the new stud, tighten until the stud seats fully, then remove the nut; do not use an impact gun for final seating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.