We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel-stud installer nut kit, three-piece set for Subaru 360 M12x1.25

V-Project Inc

V-Project Inc Wheel Stud Installer Nut Kit Subaru 360 M12x1.25

SKU CH-597V-TWCPN

Installs M12x1.25 pin studs on Subaru 360 models using the included chrome nut kit

  • Colorchrome
  • Commercial/ResidentialResidential
  • Designed for Subaru 360 models
  • M12 x 1.25 thread matches factory specs
  • Chrome finish resists corrosion during use
  • Compact 20 mm x 24.9 mm x 43.15 mm size fits tight hubs
  • Pin-stud configuration ensures accurate installation

Subaru 360 M12×1.25 stud kit

This chrome-finished nut kit is made for pin-type wheel studs on every Subaru 360. The M12×1.25 thread matches the factory specification, so the hardware threads cleanly onto original or replacement studs without cross-threading.

Fits pin studs on Subaru 360

The kit works with the existing lug holes and does not require hub modification or spacer plates. Because it uses the stock thread pitch, it leaves the brake rotor, caliper and wheel centre bore unchanged while providing the correct seating surface for the wheel nuts.

Hardened chrome nuts resist rounding

Under repeated tightening cycles the chrome plating and heat-treated steel resist galling and corner wear better than standard zinc hardware. The 20 mm, 24.9 mm and 43.15 mm overall dimensions keep the nut within the factory lug pattern, so torque retention stays consistent through seasonal tyre changes.

Highlights

  • Designed for Subaru 360 models
  • M12 x 1.25 thread matches factory specs
  • Chrome finish resists corrosion during use
  • Compact 20 mm x 24.9 mm x 43.15 mm size fits tight hubs
  • Pin-stud configuration ensures accurate installation

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

Does the M12×1.25 thread pitch fit every Subaru 360 wheel stud?

The kit is specified for Subaru 360 with M12×1.25 thread size, matching the factory stud pitch for that model.

How much heat does the chrome finish absorb during a full day of installs?

Chrome plating reflects most radiant heat; the tool body stays near ambient temperature even after repeated use.

What drive-size socket or impact gun must I already own to turn the installer nut?

The nut measures 24.9 mm across flats, so a 25 mm or 1 in socket is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.