We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer nut kit with three stepped sockets m12x1.25

V-Project Inc

V-Project Inc Wheel Stud Installer Nut Kit Infiniti M35h m12x1.25

SKU CH-BTZK-BJTJJ

Wheel stud installer nut kit with m12 x 1.25 thread fits Infiniti M35h and many Nissan and Subaru models

  • Colorchrome
  • Commercial/ResidentialResidential
  • Installs wheel studs quickly with dedicated pin-stud tool design
  • Fits Infiniti M35h and dozens of Nissan and Subaru models
  • Thread size M12 x 1.25 matches factory specifications exactly
  • Chrome finish resists corrosion during repeated workshop use
  • Compact 20 mm by 24.9 mm by 43.15 mm kit stores easily in tool drawer

Application range

This wheel stud installer nut kit fits Infiniti M35h models and a wide range of other Infiniti, Nissan and Subaru vehicles. The thread size is M12 x 1.25 and the tool is designed for pin-type studs. It is supplied new with a chrome finish for residential use.

Dimensions and construction

The kit components measure 20 mm by 24.9 mm by 43.15 mm, which is equivalent to 0.787 inch by 0.980 inch by 1.698 inch. These dimensions define the physical size of the installer nuts. No thermal, noise or power-draw data applies to this hand tool.

Critical specification

The thread pitch of 1.25 mm and the M12 diameter are the only figures that determine whether this kit matches your vehicle's wheel studs. Buyers who need a different thread size or a non-pin stud type cannot use this product.

Highlights

  • Installs wheel studs quickly with dedicated pin-stud tool design
  • Fits Infiniti M35h and dozens of Nissan and Subaru models
  • Thread size M12 x 1.25 matches factory specifications exactly
  • Chrome finish resists corrosion during repeated workshop use
  • Compact 20 mm by 24.9 mm by 43.15 mm kit stores easily in tool drawer

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I use the m12 x 1.25 installer nut to press new pin studs into the hub without stripping the threads?

Thread the installer nut onto the new stud, tighten it against the hub flange, then turn the nut with a socket to draw the stud fully seated; the chrome finish reduces galling on the m12 x 1.25 threads.

Will the chrome plating on the 20 mm x 24.9 mm x 43.15 mm installer nut wear off and require replacement?

The chrome coating is a surface finish, not a wear item; under normal residential use it does not degrade, so the nut itself does not need scheduled replacement.

At what point does the m12 x 1.25 thread engagement become the limiting factor during repeated stud installations?

The limit is the thread depth on the nut; once the stud reaches the bottom of the 43.15 mm internal thread, further force cannot increase engagement and risks stripping the m12 x 1.25 pitch.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.