V-Project Inc
V-Project Inc Wheel Stud Installer Nut Kit Infiniti G25 m12x1.25 chrome
Wheel stud installer nut kit fits Infiniti G25 and many Nissan, Subaru models with M12x1.25 thread
- Colorchrome
- Commercial/ResidentialResidential
- Designed for Infiniti G25 with m12 x 1.25 threads
- Pin-stud compatible design ensures correct wheel-stud installation
- Three-piece kit covers 20mm, 24.9mm and 43.15mm lengths
- Chrome finish resists corrosion during residential use
- Supplied new from V-Project Inc for immediate workshop readiness
Wheel Stud Installer Kit for Infiniti G25
This chrome-finished nut kit is designed to install pin-type wheel studs on the Infiniti G25. The set includes the hardware needed for a residential garage or driveway repair. It matches the factory M12 x 1.25 thread specification exactly.
M12 x 1.25 thread size and pin-stud compatibility
The single specification that decides fitment is the M12 x 1.25 thread pitch combined with the pin-stud design. Only vehicles requiring this exact thread and stud type will accept these components safely.
Suits DIYers servicing listed Infiniti, Nissan.
This kit suits owners of the compatible Infiniti, Nissan, or Subaru models listed in the factory application data who are replacing pin-type studs. Buyers needing a different thread pitch, a press-in stud design, or a professional-grade impact set should look elsewhere.
Highlights
- Designed for Infiniti G25 with m12 x 1.25 threads
- Pin-stud compatible design ensures correct wheel-stud installation
- Three-piece kit covers 20mm, 24.9mm and 43.15mm lengths
- Chrome finish resists corrosion during residential use
- Supplied new from V-Project Inc for immediate workshop readiness
Specifications
| Brand | v-project |
|---|---|
| Color | chrome |
| Commercial/Residential | Residential |
Questions about this item
How does the 20 mm × 24.9 mm × 43.15 mm size translate once the stud is seated in the hub?
The 20 mm and 24.9 mm diameters match the knurl and shank so the stud presses fully into the hub flange, while the 43.15 mm overall length leaves the correct thread exposure for the lug nut.
What does the M12 × 1.25 thread spec limit when choosing lug nuts?
Only lug nuts with an M12 × 1.25 pitch will engage correctly; any other pitch will cross-thread or leave insufficient clamping force.
What clearance do I need in the wheel centre bore for the 24.9 mm shank?
The wheel’s centre bore must be at least 24.9 mm to allow the shank to pass through without binding during installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
