V-Project Inc
V-Project Inc Wheel Stud Installer Kit Volvo 940 1991-1997 M12x1.5
Installs M12x1.5 wheel studs on Volvo 940 models from 1991 to 1997 using the included chrome tool kit
- Colorchrome
- Commercial/ResidentialResidential
- Fits Volvo 940 models from 1991 to 1997
- M12 x 1.5 thread matches factory wheel studs
- Designed for pin-type stud installation
- Chrome finish resists corrosion during use
- Compact 20 mm by 24.9 mm by 43.15 mm size
Wheel Stud Installer Kit for Volvo 940
This kit provides the tools required to install wheel studs on Volvo 940 models from 1991 through 1997. It is designed for M12x1.5 thread size and suits pin-type studs. The components come in a chrome finish for residential garage use.
Dimensions and thread specification
The installer pieces measure 20 mm by 24.9 mm by 43.15 mm, which converts to .787 inch by .980 inch by 1.698 inch. These exact dimensions match the M12x1.5 thread pitch specified for the target Volvo applications.
Build fit and workshop clearance
The compact sizing allows the tool to reach stud locations without removing additional suspension parts. It frees up bench space compared to larger press kits and requires only standard hand tools to operate. Builders working on other makes or thread sizes will need a different kit.
Highlights
- Fits Volvo 940 models from 1991 to 1997
- M12 x 1.5 thread matches factory wheel studs
- Designed for pin-type stud installation
- Chrome finish resists corrosion during use
- Compact 20 mm by 24.9 mm by 43.15 mm size
Specifications
| Brand | v-project |
|---|---|
| Color | chrome |
| Commercial/Residential | Residential |
Questions about this item
How do I use the M12x1.5 installer to press new pin studs into a 1991-1997 Volvo 940 hub without stripping threads?
Thread the installer onto the new M12x1.5 stud, tighten the nut to draw the knurled body into the hub flange, then back off and remove the tool before torquing the wheel nut.
Will the chrome finish on the 20mm, 24.9mm and 43.15mm components need any upkeep after repeated installations?
Wipe the chrome surfaces clean after each use and apply a light oil film to prevent corrosion; no scheduled replacement is required for the tool itself.
At what point does the M12x1.5 thread pitch become the limiting factor when pressing multiple studs in succession?
The fine 1.5 mm pitch transmits high clamping force per turn, so operator effort rises quickly — stop if the nut binds or the stud shoulder fails to seat fully.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
