We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with threaded components for Pontiac Sunfire

V-Project Inc

V-Project Inc Wheel Stud Installer Kit Pontiac Sunfire 1995-2005 m12x1.5

SKU CH-0RF3-8CT9G

Installs M12×1.5 wheel studs on Pontiac Sunfire 1995-2005 using chrome pin-stud tools

  • Colorchrome
  • Commercial/ResidentialResidential
  • Fits Pontiac Sunfire 1995-2005 with m12 x 1.5 threads
  • Installs pin-type wheel studs using included nut kit
  • Compact 20mm x 24.9mm x 43.15mm design reaches tight hubs
  • Chrome finish resists corrosion during repeated residential use
  • Precisely machined threads prevent cross-threading on factory studs

Wheel Stud Installer Kit for Pontiac Sunfire

This wheel stud installer kit is designed for the Pontiac Sunfire models from 1995 to 2005. It provides the necessary tools to install pin-type wheel studs with an m12 x 1.5 thread size. The kit suits DIY mechanics and professionals performing brake or hub maintenance on these specific vehicles. Buyers needing tools for other thread pitches or stud types should look elsewhere.

Straightforward Installation with Correct Sizing

The kit includes components sized at 20mm, 24.9mm, and 43.15mm to match the factory stud dimensions. Installation follows standard press-in procedures using the supplied nuts and spacers. Problems typically arise when the hub is not cleaned properly or when excessive force damages the new stud threads. Ensuring the m12 x 1.5 specification matches the vehicle prevents cross-threading.

Critical Specification: m12 x 1.5 Thread Size

The single specification that determines fitment is the m12 x 1.5 thread pitch. This kit only works with wheel studs and hubs using that exact measurement. Vehicles requiring a different thread diameter or pitch cannot use these tools. Verify the thread size on the existing studs before purchase to confirm compatibility.

Highlights

  • Fits Pontiac Sunfire 1995-2005 with m12 x 1.5 threads
  • Installs pin-type wheel studs using included nut kit
  • Compact 20mm x 24.9mm x 43.15mm design reaches tight hubs
  • Chrome finish resists corrosion during repeated residential use
  • Precisely machined threads prevent cross-threading on factory studs

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How can I confirm the V-Project Inc wheel stud installer is working correctly after setup?

The tool should press the m12 x 1.5 pin studs fully into the hub without binding, leaving the 20 mm by 24.9 mm by 43.15 mm stud seated flush and the lug nut threading on smoothly.

What comes in the box and what must I buy separately for the Pontiac Sunfire 1995-2005 kit?

The kit includes the installer tool and chrome m12 x 1.5 nuts for pin studs; you must supply the replacement wheel studs and any required lubricant or torque wrench.

Which version of the V-Project Inc installer should I choose for my 1995-2005 Pontiac Sunfire?

Select the m12 x 1.5 thread size listed for the Sunfire 1995-2005; it matches the 20 mm by 24.9 mm by 43.15 mm pin-stud dimensions specified for that application.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.