V-Project Inc
V-Project Inc Wheel Stud Installer Kit Nissan Titan 2004-2017 m12x1.25 Chrome
Installs M12 x 1.25 wheel studs on Nissan Titan 2004-2017 and other compatible vehicles
- Colorchrome
- Commercial/ResidentialResidential
- Designed for Nissan Titan 2004-2017 fitment
- M12x1.25 thread matches factory stud specification
- Chrome finish resists corrosion during installation
- Compact 20mm x 24.9mm x 43.15mm dimensions suit tight hub spaces
- Pin-stud compatible tooling ensures correct engagement
Wheel Stud Installer Kit for Nissan Titan
This installer kit fits Nissan Titan models from 2004 through 2017 and uses an m12 x 1.25 thread size. It is designed for pin-type wheel studs and includes the necessary nuts for installation. The chrome finish provides corrosion resistance for residential use. DIY mechanics and professional technicians working on these specific vehicles will find the kit matches the factory specifications.
Installation uses standard hand tools
The kit components align with the original stud dimensions of 20 mm, 24.9 mm and 43.15 mm. A common issue is cross-threading when the installer is not started straight on the hub. Ensure the threads are clean and engage the tool squarely before applying torque. The chrome surfaces can show marking if excessive force is used with improper sockets.
Chrome finish holds up under repeated service cycles
The hardened steel construction resists deformation when pressing multiple studs in succession. Heat buildup is minimal because the operation is manual and intermittent. The kit maintains dimensional accuracy across many uses without galling or thread damage. It is not suited for high-volume commercial shops that require hydraulic press equipment.
Highlights
- Designed for Nissan Titan 2004-2017 fitment
- M12x1.25 thread matches factory stud specification
- Chrome finish resists corrosion during installation
- Compact 20mm x 24.9mm x 43.15mm dimensions suit tight hub spaces
- Pin-stud compatible tooling ensures correct engagement
Specifications
| Brand | v-project |
|---|---|
| Color | chrome |
| Commercial/Residential | Residential |
Questions about this item
How can I confirm the installer is seating the m12 x 1.25 studs correctly after setup?
Thread each stud by hand until snug then use the installer to pull it fully into the hub; the stud shoulder should sit flush with no visible gap and the wheel nut must spin on freely for the full 1.25 mm pitch.
What components are included in the kit and what must I supply separately?
The kit provides the installer tool and chrome m12 x 1.25 wheel studs sized 20 mm x 24.9 mm x 43.15 mm; you will need a suitable socket or wrench to drive the installer and standard wheel nuts for final tightening.
Which version should I choose for a Nissan Titan 2004-2017?
Select the m12 x 1.25 chrome kit listed for Nissan Titan 2004-2017; it matches the factory thread pitch and the 20 mm x 24.9 mm x 43.15 mm stud dimensions required for those model years.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
