We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome wheel stud installer kit with three stepped sockets for M12x1.25 thread

V-Project Inc

V-Project Inc Wheel Stud Installer Kit Nissan Stanza m12x1.25 Chrome

SKU CH-WD9V-WTGQY

Installs M12 x 1.25 wheel studs on Nissan Stanza and many other models

  • Colorchrome
  • Commercial/ResidentialResidential
  • Installs wheel studs on Nissan Stanza with m12 x 1.25 thread
  • Chrome finish resists corrosion during repeated use
  • Three-piece kit covers 20mm, 24.9mm and 43.15mm stud lengths
  • Fits pin-type studs across Nissan, Infiniti and Subaru models
  • Residential-grade tools designed for home garage maintenance

Nissan Stanza m12x1.25 fitment

This wheel stud installer kit is designed for Nissan Stanza models using m12x1.25 pin-type studs. It provides the specific hardware needed to press new studs into the hub without damaging the threads. The kit suits DIY mechanics and shops performing brake or bearing service on these vehicles.

Residential use chrome finish

The chrome coating protects the tool surfaces from corrosion during storage and repeated residential use. Hardened steel construction withstands the pressing forces required for stud installation without deformation. No power draw or thermal considerations apply to this manual hand tool.

Pin-stud compatible dimensions

The kit includes components measuring 20mm, 24.9mm and 43.15mm to match the pin-stud geometry found on the listed Nissan applications. Chrome surfaces resist rounding when sockets engage the drive features. The precise thread pitch ensures the installer aligns correctly with the m12x1.25 studs.

Highlights

  • Installs wheel studs on Nissan Stanza with m12 x 1.25 thread
  • Chrome finish resists corrosion during repeated use
  • Three-piece kit covers 20mm, 24.9mm and 43.15mm stud lengths
  • Fits pin-type studs across Nissan, Infiniti and Subaru models
  • Residential-grade tools designed for home garage maintenance

Specifications

Brandv-project
Colorchrome
Commercial/ResidentialResidential

Questions about this item

How do I install the m12 x 1.25 wheel studs on my Nissan Stanza?

Thread the installer tool onto the new stud, tighten the nut to pull the stud through the hub flange until fully seated, then remove the tool and torque the lug nut to specification.

Will the chrome finish on these m12 x 1.25 studs need replacement due to corrosion?

Chrome resists rust under normal road conditions; replace only if the threads are damaged or the stud stretches beyond the 43.15 mm installed length.

What is the first limit reached when driving hard on these 20 mm knurl studs?

The 20 mm knurl diameter and 24.9 mm shoulder length set the grip in the hub; sustained cornering loads can loosen the press fit before the m12 x 1.25 threads yield.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.